Jump to content
SAU Community

98 Plus Octane Booster

MRHD66

By MRHD66,
in Engines & Forced Induction

 Share

Recommended Posts

Joshbigt62r Proficient

Joshbigt62r

Posted
Posted

You can get e85 delivered in drums but it's quite expensive isn't it compared to at the pump.? Better off going water methanol + 95-98 octane fuel preferably 98 octane and water/meth as jet_r31 mentioned.

Cheers Josh

XR Pilot Contributor

XR Pilot

Posted
Posted (edited)

I looked into this a fair few years ago before E85 was available - octane booster will generally raise a fuels given octane by a few points. Ie point-something of an octane. So 98 will become 98.2 octane for example. The only way to get a decent boost in octane is to mix something like Toluene with 98 (121RON, turbo F1 cars used an 86% Toluene/14% n-Heptane filler blend. It's pretty nasty to handle but you could get it in drums as of a few years ago). Mixed at 65% 98 / 35% Toluene this will get you up to around the same octane as E85 at a much higher cost vs pump E85.

I think your only viable options are either reduce the compression ratio of that motor to run 98, run water/meth like Darren said (if you do run water/meth I'd listen to this man!), buy E85 drums or take a trip to either Newcastle or Kempsey and fill up a few jerry cans.

Edited by XR Pilot
WMDC35 Experienced

WMDC35

Posted
Posted

Octane booster is also completely unreliable and probably doesn't even add half as much octane rating as claimed. I made some from mothballs and petrol in the 1990s that was probably at least as effective (ie it didn't really do anything).

mythbusters did a test with fuel additives, the moth balls seemed to do pretty well haha

JustinP Mentor

JustinP

Posted
Posted

I definitely would not recommend using 98 + octane booster. Due to some flooding that we had a few years ago, I got stranded in my R34 and was forced to use 91 RON fuel as it was the only option I had to get home. I added octane booster as a safeguard. Still suffered engine failure haha :P Thankfully I can laugh about it now! 3 years and counting and I still have not finished rebuilding it!

I would recommend the water / methanol option. But remember, as you are relying on it for everyday driving you need to make sure the setup is ultra reliable and has the appropriate failsafes.

Super Drager Mentor

Super Drager

Posted
Posted (edited)

I definitely would not recommend using 98 + octane booster. Due to some flooding that we had a few years ago, I got stranded in my R34 and was forced to use 91 RON fuel as it was the only option I had to get home. I added octane booster as a safeguard. Still suffered engine failure haha :P Thankfully I can laugh about it now! 3 years and counting and I still have not finished rebuilding it!

I would recommend the water / methanol option. But remember, as you are relying on it for everyday driving you need to make sure the setup is ultra reliable and has the appropriate failsafes.

Well that sounds wrong, if you weren't on boost and loading the car up it shouldn't matter. Baby the car and you can drive it on 91 octane easily. I've never seen a car so aggressively tuned on the low load part of the map that it detonates on 91 octane.

Edited by Super Drager

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • silviaz
      One Headlight isn't working - Driver Side Fuse Keeps blowing

      By silviaz · Posted

      Thanks man, I appreciate that. I'll keep it in mind going forward, important to know.
    • MBS206
      One Headlight isn't working - Driver Side Fuse Keeps blowing

      By MBS206 · Posted

      I strongly recommend anyone playing with cars chasing anything electric, get a basic understanding of using a DMM, and about 12V DC systems. They're REALLY easy, you only need to know V=IR and how to apply it, and you can work out what your readings should be doing. For a simple check on a light bulb, you're looking for 12V at the positive to the light, a near zero resistance to ground, and then for a small resistance across the globe when unplugged. If one of those values isn't right, you won't get what you need. Now if they're all okay,and you then plug the light in, and it still won't work, you now do a voltage check across the globe positive to negative. It should effectively read full battery voltage. If it's not, especially if it's quite low, the age old V=IR starts to be able to be thought about, you now know though, for the current flowing, there isn't much voltage for the given resistance, but the rest of that V has to be dropping somewhere else. So now do a voltage check from ground of globe, to ground of car, then do voltage check from positive of battery, to positive of the light connector. Things like a high resistance in a wire/join will start to "steal" voltage on you. So now step back through which ever wire, until you find the voltage drop is non existent, you're now before what ever is steal your voltage for example.   There's plenty of YouTube videos, but really worth understanding some V=IR, and doing some even theoretical numbers to start to understand it. Then you'll know what the DMM is telling you.
    • kevboost7
      One Headlight isn't working - Driver Side Fuse Keeps blowing

      By kevboost7 · Posted

      Consider yourself lucky it was just a bulb 
    • MBS206
      NC MX5

      By MBS206 · Posted

      Is Jackie home by Friday?
    • Piggaz
      R33 GTR OEM parts + random parts and oils

      By Piggaz · Posted

      Item 10: Tech Edge wideband sensor interface and display. You’ll need to buy a new sensor. $150. Item 11: part of a Willians 5 point harness. $40 Item 12: OS88 gear display. No need for it now, my PPG sequential came with one. $30
×
×
  • Create New...