Jump to content
SAU Community

Recommended Posts

You can get e85 delivered in drums but it's quite expensive isn't it compared to at the pump.? Better off going water methanol + 95-98 octane fuel preferably 98 octane and water/meth as jet_r31 mentioned.

Cheers Josh

I looked into this a fair few years ago before E85 was available - octane booster will generally raise a fuels given octane by a few points. Ie point-something of an octane. So 98 will become 98.2 octane for example. The only way to get a decent boost in octane is to mix something like Toluene with 98 (121RON, turbo F1 cars used an 86% Toluene/14% n-Heptane filler blend. It's pretty nasty to handle but you could get it in drums as of a few years ago). Mixed at 65% 98 / 35% Toluene this will get you up to around the same octane as E85 at a much higher cost vs pump E85.

I think your only viable options are either reduce the compression ratio of that motor to run 98, run water/meth like Darren said (if you do run water/meth I'd listen to this man!), buy E85 drums or take a trip to either Newcastle or Kempsey and fill up a few jerry cans.

Edited by XR Pilot

Octane booster is also completely unreliable and probably doesn't even add half as much octane rating as claimed. I made some from mothballs and petrol in the 1990s that was probably at least as effective (ie it didn't really do anything).

mythbusters did a test with fuel additives, the moth balls seemed to do pretty well haha

I definitely would not recommend using 98 + octane booster. Due to some flooding that we had a few years ago, I got stranded in my R34 and was forced to use 91 RON fuel as it was the only option I had to get home. I added octane booster as a safeguard. Still suffered engine failure haha :P Thankfully I can laugh about it now! 3 years and counting and I still have not finished rebuilding it!

I would recommend the water / methanol option. But remember, as you are relying on it for everyday driving you need to make sure the setup is ultra reliable and has the appropriate failsafes.

I definitely would not recommend using 98 + octane booster. Due to some flooding that we had a few years ago, I got stranded in my R34 and was forced to use 91 RON fuel as it was the only option I had to get home. I added octane booster as a safeguard. Still suffered engine failure haha :P Thankfully I can laugh about it now! 3 years and counting and I still have not finished rebuilding it!

I would recommend the water / methanol option. But remember, as you are relying on it for everyday driving you need to make sure the setup is ultra reliable and has the appropriate failsafes.

Well that sounds wrong, if you weren't on boost and loading the car up it shouldn't matter. Baby the car and you can drive it on 91 octane easily. I've never seen a car so aggressively tuned on the low load part of the map that it detonates on 91 octane.

Edited by Super Drager

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...