Jump to content
SAU Community

Recommended Posts

Has anyone heard of, or been, fined as a result of an excessive reading at the track?

Read a ruling in some recent supp regs indicating it's possible/likely. :angry:

What is the fine for exceeding noise limits?

I reckon that on public roads they should give you a second chance to remedy it and then just send you home anyway.

Link to comment
https://www.sau.com.au/forums/topic/428420-noise-at-tracks/
Share on other sites

You don't get fined for a reading over 75DB, you just get sent home. Makes it an awful waste of money to get to the track, knowing your car could be over the limit to get sent home. The noise limit's are strictly enforced, and because they are so well known, ignorance is no excuse. A track is NOT a public road, it is a private venue available for hire. Not only do you waste your money, you make it hard for everybody else and for the club holding the event by taking your over limit car to one of these events and trying to get away with it.

It's just way easier to make sure your car is under 75db at 30 metres.

Link to comment
https://www.sau.com.au/forums/topic/428420-noise-at-tracks/#findComment-6922570
Share on other sites

I heard someone last week or the one b4 claim to be fined for excessive noise at Sandown last weekend or the one b4.

turned out when dug deeper he got busted leaving sandown on the street and busted by EPA

AFAIK we are on private property when on a track so we cannot be financially fined, just removed from the track

Link to comment
https://www.sau.com.au/forums/topic/428420-noise-at-tracks/#findComment-6922638
Share on other sites

I can confirm 100% without a shadow of a doubt at Sandown you do not receive a fine.

You get warned if you are over 75dba and given a chance to reduce the noise output. If you go out again and you are still over, then you get sent on your merry way :)

Link to comment
https://www.sau.com.au/forums/topic/428420-noise-at-tracks/#findComment-6923141
Share on other sites

Hmm. The sup regs for the upcoming John Mott Memorial Sandown mentions you may get fined for being over the noise limit.

http://www.nissancarclub.org.au/Events/Downloads/2013JohnMottMemorialSprint2013/John%20Mott%20Memorial%20Sprint%20REGS%202013.PDF

Blue text halfway down

I'm entering anyway so I'll make sure I'm only 74.98dba :rolleyes:

Link to comment
https://www.sau.com.au/forums/topic/428420-noise-at-tracks/#findComment-6923913
Share on other sites

^ lol exactly, everyone has been doing that for years - and that's even if a tester rocks up (not always)... If they do, they usually set up in the same spots each time, so it's not hard to work out.

Also once the dude has gone home (rarely there the entire day at a club sprint)... Well... You know what to do :thumbsup:

Link to comment
https://www.sau.com.au/forums/topic/428420-noise-at-tracks/#findComment-6925358
Share on other sites

  • 2 months later...

Yup, no guilt in doing this either... In 95% of cases the race tracks were there before the houses that complain.

It's no different to building next to a major airport and complaining and in my opinion should be treated as such. i.e. houses should simply be told bad luck.

Link to comment
https://www.sau.com.au/forums/topic/428420-noise-at-tracks/#findComment-7025991
Share on other sites

  • 4 weeks later...

I should re-word my question.

Is the 75db limit in the supp regs correct? or is it possible that it has just been carried over from other events in the regs?

just curious because its the first time ive personally come across 75db for winton

Link to comment
https://www.sau.com.au/forums/topic/428420-noise-at-tracks/#findComment-7067934
Share on other sites

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...