Jump to content
SAU Community

Recommended Posts

My understanding was always that the knees come in when you're approaching your weight limit. You might have to do some assistance exercises or maybe some band work to help you at the problem point.

When do your knees start turning in? Coming up or going down?

I'm not savvy enough on squat mechanics to suggest which muscle you want to target, Rev would have a better idea, but I'm thinking anterior adductor (inner thigh) and ITB (outer quad) stability could be a problem?

I've used brackets just in case my terminology is wrong :)

Yeah it started doing it at 50kg last night which isn't that heavy for me, but yeah the 60kg was bad it was making my whole body lean to the left as I was coming up.

My knee is fine going down, it's as I come back up that it bends in and it's only the right knee, so therefore it's my left leg predominantly the adductor that is weak?

I was wondering if just doing leg extension, leg curls and lunges on the left leg would help at all

Left leg/glute is weaker than the right; right knee is coming in to save the day and you're shifting the weight over the right leg when the weight gets too heavy for the left to push it's share.

It's a mobility issue that needs to be trained out of the CNS, not unlike a dominant arm during bench press but more exacerbated. Your adductors aren't weak, you just don't know how to use them (or moreso, not use them) to keep the right leg from coming in to save the day when "shit hits the fan" and the left leg/glute can't drive anymore.

Interesting. Stuff, I'd say the right is compensating for the left.

EDIT: Birds just posted the same thing.

Anyway, you can do single leg work to bring the left up to par.

I had to do that back in the day of trying to get bench weight up. Trained left side to stop right compensating.

That or stick to a weight both legs can comfortably drive with and slowly increase weight until they are synchronized.

If used to do it on 40kg but now that she has surpassed that (making left leg stronger), it doesn't. It wasn't doing it on 50 recently but I'd say muscle tiredness is likely responsible for this particular incident.

01/05/14

Deadlift

60kg x 10

80kg x 5

100kg x 1

110kg x 1

80kg x 10

80kg x 10

Bench Press

20kg x 10

30kg x 5

40kg x 3

47.5kg x 1

40kg x 7

Bicep Curl

10kg x 10

15kg x 10

20kg x 5

20kg x 5

20kg x 3

Push-ups

20

Ab work

05/05/14

Squat

20kg x 10

40kg x 10

50kg x 5

60kg x 1

62.5kg x 1

50kg x 10

40kg x 10

40kg x 10

Pause Squat

40kg x 5

Lat Pulldown

30kg x 10

40kg x 10

45kg x 10

50kg x 10

55kg x 7

60kg x 3

65kg x 1

Seated Row (cable)

30kg x 10

35kg x 10

40kg x 10

45kg x 5

50kg x 4

55kg x 2

Captains Chair

40

30

30

09/05/14

Deadlift

60kg x 10

80kg x 5

100kg x 1

112.5kg x 1

90kg x 5

80kg x 10

80kg x 10

Bench Press

20kg x 10

30kg x 5

40kg x 3

50kg x 0

45kg x 2

40kg x 8

Bicep Curl

10kg x 10

15kg x 10

20kg x 5

20kg x 4

20kg x 4

Decline Ab Crunch with 5kg plate

10

10

10

Hanging Leg Raises

10

10

10

Pull-ups

2

12/05/14

Squat

20kg x 10

40kg x 10

50kg x 5

60kg x 0

60kg x 1

65kg x 1

50kg x 10

50kg x 5

Lat Pulldown

30kg x 10

40kg x 10

45kg x 10

50kg x 10

55kg x 7

60kg x 3

65kg x 1

Seated Row (cable)

30kg x 10

35kg x 10

40kg x 10

45kg x 5

Ab work

You women are all the same lol

Couldn't just say thanks, had to play it down.

Just accept the damn compliment :D

I did 25 reps of squat with a massive 25kgs on the weight belt last night and my back did not explode, awww yeah.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • When you crank your car, and hit it with a timing light, can you see a steady crank timing?
    • Oh, forgot to add, A few months ago I was getting mixture codes and the car was using crap loads of fuel. You could smell the unburned fuel in the exhaust, it was crazy strong. Economy was over 17.5 l/100 and usually around 19. I smoked the engine and found a leaky CCV hose which I replaced and then I replaced my two pre cat O2 sensors, I also replaced the MAF. This fixed my mixture codes and improved my exonomy but I'm still 14 - 15 l/100 when pottering about town so something is still amiss. Throttle response is much better and it has more pep but I'd like to know why it's still so thirsty (and I'm hoping that whatever it is gives me a bit more poke).    
    • Car is on factory injectors/z32 maf/ q45 throttle body/ z32 ecu with nistune 
    • Hello all, currently finishing up a rb25 swap into my s14. Having issues with starting, car has spark (confirmed by pulling a plug and watching it spark), has fuel(confirmed by checking pulse/voltage at injectors all spark plugs are soaked in fuel). Car cranks over and pops into the exhaust with a heavy fuel smell but no attempt to start or run, I have torn the timing cover off and triple confirmed timing, turned the CAS in multiple spots both directions, attempted to start with coolant temp and maf unplugged, checked my fuel lines and made sure they weren’t backwards, checked voltage at cas/injectors/coilpacks, made sure all the grounds in the harness are connected and added a few grounding straps (1 from chassis to block, 1 from chassis to head, and 1 from chassis to igniter chip) I am getting stumped here. As a last ditch effort I made a full grounding harness tonight that’s going to run from the battery and add an extra ground from the battery onto the coil pack harness/igniter chip/ intake manifold/ Wiring specialties harness ground/ and alternator. I’m hoping maybe the grounding harness will fix it here but posting here to see if anyone has any other ideas on what else I can check. My fuel pressure is unknown right gauge will be here tomorrow.  IMG_3206.mov
    • yeah I was shocked when I checked my spare OEM on and as below that's how they come from Nissan. (side interesting note new NEO gearbox and replacement park lack the brass bush on the tips and its just all alloy) unsure about damage to the box currently back at 1110 to be pulled down/inspected and selector fork replaced as he built it previously and given the never before seen failure on his billet forks he is replacing it under warranty. He said he has used always OEM the keyway tab without issue for years so it could be an unlucky coincidence. I did talk to him about the sharp corners and stress concentration too. Re: hard shifts i got 7+ years out of the OEM one and the fork itself failed not the keyway. so could be bad luck as I said or an age thing + heat cycles in box and during fabrication of billet?
×
×
  • Create New...