Jump to content
SAU Community

Recommended Posts

did you notice much in the wing etc? a mate runs the same wing on his 33 and he said he noticed a fair bit of difference

kay, i see 2 seconds, massive

Edited by Mr. Untouchable

OMG this car is a TV star...they had coverage of the Winton Supersprint on SBS/ Speedweek today. Well done :)

:cheers:

Nice work Johnny.....loving it.

Looking forward to seeing the latest additions!!

Have you had it on the scales since its diet??

Always wondered what they actually weigh......my rego sticker says 1200kg.....paha!!!

Cheers,

Dave M

Haven't yet.

They are much heavier than 1200, thats for sure. Nissan says 1370ish from the factory.

I'd say it's 1300'ish at the moment. You can take a heap off metal and gear off it, but there has been so much added.

So the focus is firmly on World Time Attack in October. Then Winton/Wakefield come up with feeder state rounds. So it's on to improve the car in readiness for the Vic round.

Weight, removing the AC

IMG_1573.jpg

And ducting between the intercooler and radiator

IMG_1574.jpg

Adding a power steering cooler at the same time.

IMG_1551.jpg

Changing the spring rates from 8/6 to 10/7, longer wheel studs

IMG_1537.jpg

A change in wheel size. From 17x9 +22 to 18x10 +35, these needed a 5mm spacer on the front to clear the inside.

Also, the regs for Vic were a little stuffed and allow club cars to run r comp tyres.

So a set of 265 A050's in medium, my first try at an r comp tyre.

IMG_1538.jpg

IMG_1545.jpg

more powerrrrrrrrrrrr

change the stock intake pipe to a hard one and give it more boost. Also had to change the actuator from the stock one to a HKS 1 bar.

IMG_1569.jpg

The little 21U won't hold boost up top and bleeds off to from 18 to 15PSI

IMG_1581.jpg

There isn't enough time for parts to come in a put the diff back together before NSW Time Attack, so I raid my brothers daily.

Which has a newer NISMO GT 1.5 way (mine is an old NISMO mech 2 way). But is a non ABS housing diff.

So I'll be running NSW TA without ABS :huh:

At the same time the rear arms go off to pedders for polly bushes and new ball joints.

IMG_1823.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Actually everyone on the roads was really well behaved. The only person that did any minor tailgating was a local hoon in a Turbo Focus. Unfortunately we weren't going the same way so there was no grand initial D touge battle. Lots of people pulled over and let me through. The amount of "Hey man nice car, omg skyline, nice 34 man woo" was suprising. Like really suprising. Like almost annoying. My partner was obviously surprised, she'd never seen anyone in the real world point out the car/like the car/want to chat about the car before, so to have like 3 people per day mention it was notable, I could finally say SEE? SOMEONE THINKS THEY'RE COOL. Everyone was also pretty suprised about the weather. Every day was dry and about ~13-14C. Mount Wellington had a sign that said they close the gates at 9pm and I was heading up there at about ~7:30. It was VERY apparent that conditions were getting significantly worse by the minute on the way up and down. The road on the mountain was terrible though, it's no driving road. I have various suspension related questions now. Luckily it was only about 20 minutes from where we were staying to the top of the mountain as said Google maps. We only had the 2 nights in Hobart. We went to the Farm Gate Market though which was really good - And went down to the Hastings Thermal springs/caves down there during the day. I'd definitely be up for going back again, so luckily there's a few more sights yet to see. Didn't get to do the west coast/queenstown/cradle mountain so this was supposed to be a 'scouting' trip anyway of sorts if I were to one day do/take part in/organize a more car-focused trip. As for the boat, it wasn't bad. Well it was bad, but not in the way you're thinking. We did the night trip which leaves at 6:45 (though you have to be there ~2 hours earlier) and arrives the next morning at about 6am. There is nothing to do on the ship. If you plan accordingly and bring a book/tablet/show to watch/charger you can just chill out, take some Travacalm and just sleep through it. The food there is an extremely basic buffet that costs $32 a plate, or $14 for a $3 pizza. The way back we had a travel kettle and a few different types of cup noodles and made our own tea/coffee in the room. This was a far superior way to do it. At the very least book one of the rooms with beds. I guess as we were in the off season we didn't have room mates. You get an option for rooms with 4 beds (2x bunks) or a room with just the two bottom beds. There's also some option for a deluxe queen bed but it's much pricer. We've been on sleeper trains in Asia before so we figured this is similar (and it was)
    • You just gotta be really, really, really clear and decisive with what you want your end product to be. 99% of people who want this conversion aren't "I want to run a 295 front tyre!" so they don't really need the widebody. They just want the OEM body to look a little less dumpy, so bonnet, bar, skirts job done with some camber, stretch, slam. It's when you want that, but then decide to pivot later you get big problems. See also if you're willing to get an all in one fibreglass bar, and you're willing to accept fibreglass problems like cracking the entire item on a driveway, instead of just a piece attached to the bottom, etc etc etc. Decide this all before buyin'.
    • After @Kinkstaah debacle, I'd never want to try and get it right 😛
    • The hood lines up with the fenders. The front bar doesn't perfectly line up with the fenders where the wheel arch is. You have to 'squeeze' the front bar 'in' as it wants to naturally flare out and be longer on the sides. There's a few threads where people notice this when they only swap a GTR style bumper and front bar. Unless you have genuine OEM items - you may be better served getting conversion kits. There are GTT bumpers to fit GTR hoods. There are GTR hoods (non genuine) to fit the GTT bracketry. MAY  
×
×
  • Create New...