Jump to content
SAU Community

Recommended Posts

Ppls.. ;)

My cars just been resprayed. I pick it up Thursday. ;)

I poped down today to check it out without its windows and lights in.

It hasn't been buffed or checked over yet but from what I can tell it didn't look like it needed a buff.. Its soo damn shinny. The Colour is such a rich black.

Looks awesome.

So thats got me thinking.. What Polish?

Should I use a Wax type polish or the other type of polish like NuFinish or 5 Star?

http://www.nufinish.com/

http://www.5starshine.com/

I've used NuFinish on a different car and it did keep the water beading for much longer than the usual car polish. It was also easy to remove bird crap.

BUT.. does it really protect the paint?!?!

Link to comment
https://www.sau.com.au/forums/topic/43001-car-just-resprayed-which-polish/
Share on other sites

  • Replies 44
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Pinnacle Souverain, S100, Poorboys or Clearkote Moose Wax...

Good luck finding them here though, I order mine from the states.

You can get S100 from Harley Davidson dealers in Australia, so that's probably the best bet for you.

I use Meguires Gold Class. I use to buy it from the US when I was travelling over there with my old job (it cost me ~$6US) Luckly I haven't run out of it yet. But when it's time to get more I think I'm up for mid $30's.

I would highly recommend the Meguires Gold Class.

Clearkote Moose Wax is the goods, if there's an aussie distributor I'd get it from them in a flash, but right now i'm restricted to when a friend goes over tot he US only.

Oh and buy a clay bar... mmm clay bar.

You can order Clearkote products online:

www.clearkote.com

I have ordered from Everett Glass (clearkote's head honcho) before and I can recommend NOT to get it shipped via surface mail... It took MONTHS to arrive. Get it sent via airmail.

I also suggest to purchase the following:

Clearkote QuikShine (admittedly Meguiars QuikShine is also very good), Vanilla Moose Wax and Moose Wax.

Order of application:

1. Wash car with Dawn dishwashing liquid or other akaline based detergent. This will cut right through all existing waxes and remove buildup of product. (only do this every third waxing application)

1. Clay Bar (if needed)

2. Vanilla Moose Wax (removed surface marring (swirl marks))

3. Quik Shine

4. Moose Wax (protectant and gives that deep, wet look to your paintwork)

5. Quik Shine

Spend a day doing the above and your black paint will look like a billion dollars. Depending on whether you garage your car, park it under trees, near the ocean, etc... That will protect your car for about 3-6 months. It won't stop swirl marks however, so you will have to do it more often if you want your car looking swirl-free all the time.

And if you don't like the products, PM me and I'll buy them off you.

These are PROFESSIONAL car care products, not consumer targetted, mass-marketed products like Meguiars and Mothers.

As for towels and sponges etc... Stick to microfibre towels for drying, and pure lambswool mitts for washing the car, constantly wringing it out and spraying off all the contaminants so you don't rub dirt over your paint which will obviously scratch it. Goto http://www.autopia-carcare.com for great detailing products. Their concours range of towels are HEAVEN! ;)

Actually just looking at Clearkote's website, they have released a new Carnauba Wax... Everett gave me a small sample of some new wax he was about to release in my last order, I wonder if that's the one...

Whatever it was, it was excellent ;)

wow and here i was thinking the only thing merli ever cared about was the feel of soft supple leather on his naked skin...

-joel-.... you're on street commondoors aren't you? I recognise you nick from a thread that's sorta skylines vs commondoor on there.

a clay bar i well its a bar of clay, you rub it on your car and it takes all the dirt off without scratching the paint/polish. Its THE best way to remove grit, dust particles that have sorta gotten intot he polish etc, that usually don't come off with the pre wash.

Moose Wax - $30 (Quart... This is enough to wax your car about 20 times)

Vanilla Moose - $12

QuikShine - $38 (Gallon... This will last you for AAAAGES)

--------------------

Total - $80

Therefore, I suggest you get that "Show Special for $60" at the bottom of the Order Form Page... Great value!

Shipping is pretty expensive though... But what's $150 (all up) when you've just spent thousands on a top quality paint job?

Oh, I've never had a car resprayed before, but I think you have to let the paint cure for a few weeks? So don't go washing it or something until the paint is completely cured. Ask your spray painter. Depends on how the car was baked as well I think.

And since it's a new paint job, I think you can skip the clay bar

Guest RedLineGTR

Okay first of all thoe a paintjob is baked in an oven it still has to breathe and the paint to form its hardest form this takes a week or so. The only polishes you can use are "pure" polishes I believe meguires sell these types but don’t have too much info on other brand. My 2 cents

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • What does it look like with highway driving? And yes, I had a similar thought as Duncan. It looks quite similar in my Stagea and I have made myself accept it as normal. Might have to look into it some day  
    • While I was waiting for the new parts to come in for the charge pipe and radiator I decided to do some turbo modification. The drive pressure (exhaust backpressure) was a lot higher that I thought it should be. For 32lbs of boost drive was 55lbs. The turbine housing is a 1.10AR and my turbo builder has suggested to go to a 1.25AR. To test if a larger AR would do anything to reduce drive pressure AND not spend any money I decided to hog out the divider in my current housing. I removed it from the inlet and the whole way through the housing.  After reassembly and testing it doesn't look like this modification did anything for reducing drive pressure or requiring more fuel (making more power). Oh well, it was worth a shot. We'll get some data at the track if it makes it past the 60ft. I also machined a $7 shift knob off Amazon to fit my Stillway shifter since I didn't like the Stillway shift knob. Next on the list was the radiator replacement and fabrication of a new intercooler tube that had no silicon coupler. No pictures of this - I was short on time each night after work to get this done and didn't stop to take pictures.  Next was to get the clutch disks out and replaced. Previously when installing the dogbox I had ordered a set of the same sintered iron disks I had been running because I switched to the 26-spline input shaft. I thought it was odd that they didn't have any markings or brand name on them like all my old disks had but installed them anyway. At the track I could not get the clutch to lock up using my normal strategies. After two track nights I reached out to the clutch manufacturer and ask their thoughts. They said they had to switch the material out because they were having trouble getting the original material and that this new material would not take to being slipped very well.  So out with the first set of 26-spline disks and in with the correct material 26-spline disks. While I had the trans out I added an inspection/service hole. I've wanted one of these for a while. Now I can have a look at things and change the front cover shimming when needed (clutch wear). I hustled and got the clutch change done in a few hours on a Saturday. Hopped in the car and drove home. On the way home I did a 1-3 pull. When shifting from 2nd to 3rd the core plug in the back of the cylinder head popped out and dumped all the coolant. Thankfully I was only 30 seconds from home and coasted it there. Datalog showed nothing unusual and 2.5psi of coolant pressure. That plug has been in there since 1992 but I guess it worked its way out. Pulled the trans AGAIN and replaced the plug, JB welded it in, and made a brace. Also deleted the head drain I had added in during the bearing issue fiasco.  I am currently changing my boost control plumbing to make it cleaner. After that is done I'll make another attempt at getting past the 60.
    • Are you 100% sure this isn't tune related?
    • 140-150 across the board. At this point hoping the grounding harness fixes it. My grounds are all tied to the chassis and none to the battery. For SR and KA that’s never been a problem for me but had a few other guys here and Reddit who told me RB really like a very solid ground setup tied to the battery so going to try that next, I’m stumped if that doesn’t do it. Never had a car have spark and fuel and not fire off before. Only thing I can think is the spark is intermittent/weak because of grounds nothing else really makes sense at this point 
    • I am having close to the same issue. Can you help me with what wire you grounded to get your pump to trigger?
×
×
  • Create New...