Jump to content
SAU Community

Recommended Posts

I recently wrecked a 4 door Gts-4 and have a few parts left over.

I need all this gone hence the cheap prices.

Located lower Blue Mountains Sydney, happy to post or ship most items unless stated otherwise.


Front passenger drive shaft $100


Sedan doors $40 each pick up only (all four available, more pics on request)
IMG_9961_zps8e72dd32.jpg

IMG_9966_zps52621bdd.jpg

Side mirrors $20 pair (paint is faded)
IMG_9960_zps3956a9fd.jpg

Gtr/gts4 tailshaft $40 pick up only

Resistor pack $20
IMG_9487_zps0598ed9a.jpg

Accelarator and throttle cable $10 each
IMG_9482_zpsa255e0a5.jpg

Brake pedal $10
IMG_9481_zpse8cf558d.jpg

Front brakes (calipers/lines) $100

Brake master $sold
Brake booster $40
IMG_9478_zpsb270c73d.jpg

Carbon canister $10
IMG_9480_zps5c01b7fa.jpg

Washer bottle $10
IMG_9484_zps6a5df1f9.jpg

Engine bay body loom $50
IMG_9490_zpsd20688ec.jpg

Power steering cooler $20
IMG_9489_zpsdb481a41.jpg

G- sensor $80
IMG_8698_zps3ecf4bd3.jpg

Steering column $20 (excludes ignition and indicator stalk) pick up only


Interior parts:

Sedan driver's window switch $50
IMG_9965_zps61ea9144.jpg

Passenger and rear window switches $30 each

Steering wheel plastics $30

Sun visors $10 Pair

Interior lights $20 each including postage
IMG_8925_zps69bd95b1.jpg

Link to comment
https://www.sau.com.au/forums/topic/430540-r32-gts4-sedan-parts-make-an-offer/
Share on other sites

Condition of rear bar?

OEM plastic one?

Also would you post this?

Sorry, pick up only.. Didn't see.

Hi mate, some parts I will ship if need be but the price of the item goes up (to make it worth my while packaging and driving to drop off t the depot etc). Drop me a pm if you're keen and we'll work out a price

Does the car have heated mirrors? if so I'd be interested in the door looms. Do you have many more. Pics as they don't seem to work for me.

not sure mate, haven't checked

happy to pull one off and take a look.... you'll have to tell me what i'm looking for though, extra plug or something?

not sure mate, haven't checked

happy to pull one off and take a look.... you'll have to tell me what i'm looking for though, extra plug or something?

From the pics it looks like it does have heated mirrors, There is an extra plug I think, So yeah if your interested in selling them seperately I'd be interested in both front door looms.

I ran into the situation where I have the mirrors and the door switch, but not the loom

hi mate, you still got the door cards?? free?? I can pick up im in Campbelltown though so we have to work out a time etc. also the interior door side mirror trimsP1310913.JPG

hi mate, you still got the door cards?? free?? I can pick up im in Campbelltown though so we have to work out a time etc. also the interior door side mirror trimsP1310913.JPG

Yea got all those, flick me a pm to arrange

Hey mate, the washer jet pumps on the washer bottle working well? My just burnt out. Ill buy the whole thing if you dont want to separate them. would just be cheaper postage.

Postcode 4883 QLD if you can get a quote

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Also, I logged some data from the ECU for each session (mostly oil pressures and various temps, but also speed, revs etc, can't believe I forgot accelerator position). The Ecutek data loads nicely to datazap, I got good data from sessions 2, 3 and 4: https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-2?log=0&data=7 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-3?log=0&data=6 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-4?log=0&data=6 Each session is cut into 3 files but loaded together, you can change between them in the top left. As the test sessions are mostly about the car, not me, I basically start by checking the oil pressure (good, or at least consistent all day). These have an electrically controlled oil pump which targets 25psi(!) at low load and 50 at high. I'm running a much thicker oil than recommended by nissan (they said 0w20, I'm running 10w40) so its a little higher. The main thing is that it doesn't drop too far, eg in the long left hand fish hook, or under brakes so I know I'm not getting oil surge. Good start. Then Oil and Coolant temp, plus intercooler and intake temps, like this: Keeping in mind ambient was about 5o at session 2, I'd say the oil temp is good. The coolant temp as OK but a big worry for hot days (it was getting to 110 back in Feb when it was 35o) so I need to keep addressing that. The water to air intercooler is working totally backwards where we get 5o air in the intake, squish/warm it in the turbos (unknown temp) then run it through the intercoolers which are say 65o max in this case, then the result is 20o air into the engine......the day was too atypical to draw a conclusion on that I think, in the united states of freedom they do a lot of upsizing the intercooler and heat exchanger cores to get those temps down but they were OK this time. The other interesting (but not concerning) part for me was the turbo speed vs boost graph: I circled an example from the main straight. With the tune boost peaks at around 18psi but it deliberately drops to about 14psi at redline because the turbos are tiny - they choke at high revs and just create more heat than power if you run them hard all the way. But you can also see the turbo speed at the same time; it raises from about 180,000rpm to 210,000rpm which the boost falls....imagine the turbine speed if they held 18psi to redline. The wastegates are electrically controlled so there is a heap of logic about boost target, actual boost, delta etc etc but it all seems to work well
    • hahah when youtube subscribers are faster than my updates here. Yes some vid from the day is up, here:  Note that as with all track day videos it is boring watching after the bloopers at the start.  The off was a genuine surprise to me, I've literally done a thousand laps around the place and I've never had instability there; basically it rolled into oversteer, slipped, gripped and spat me out. On the way off I mowed down one of the instructor's cones and it sat there all day looking at me with accusing cone eyes as I drove past. 1:13:20 was my fastest lap, and it was in the second session, 3rd lap.  It (or me!) got slower throughout the day as it got hotter.      
    • It sounds like you want what the Toyota Landcruisers have for their roof racks. Wanna know what you end up with? Rust holes in the roof, and water everywhere...
    • Discovered today that if I select reverse first and take my foot off the brake, then select drive, the drive indicator light works and so does the tiptronic gear indicator. 
    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Does anyone here have any ideas?   Cheers guys
×
×
  • Create New...