Jump to content
SAU Community

Recommended Posts

Experienced this once on my other car. It was a dirty throttle body..

Felt it too on my friends turbocharged vw and corrolla... seems normal though. Slight stutter on acceleration from stop.

doesnt happen on my 350gt. Im hearing enough loose panels in the car :rolleyes:

Just putting my 2cents worth

Hey mate i have this problem as well in my car when i put car into drive from stationary to drive,or drive to reverse it gives a jerk.Sometimes while driving the car it gives stutter for about 2-3 seconds above 1000 RPM,Car is back with dealers to get it fixed clearly explained them if they can get this fixed more than happy to get that back otherwise dealwith them in other way.So the salesman at the caryard is keeping me updated what's been going on i just recieved text this evening saying they have cleaned the throttle body and car is booked in for throttle soft wear RESET I Dont know what he meant with this RESET.If u got any idea could you explai.

Cheers

They cleaned the throttle, and now it's probably worse, so you are paying for them to do a throttle re-learn now, that should have been done in the first place imo. It's a 10 minute job with the Consult reader, so don't let them charge you through the nose...

They cleaned the throttle, and now it's probably worse, so you are paying for them to do a throttle re-learn now, that should have been done in the first place imo. It's a 10 minute job with the Consult reader, so don't let them charge you through the nose...

My last mechanic told me he couldn't connect to my car using consult because it was configured to speak to his 2x R35GTR's only, does that sound legit?

They cleaned the throttle, and now it's probably worse, so you are paying for them to do a throttle re-learn now, that should have been done in the first place imo. It's a 10 minute job with the Consult reader, so don't let them charge you through the nose...

as car is under 6 months warranty but it has got too many problems lkike when engine is hot,we turn car off and start it again it makes a clap sound from dashboard,i changed the factory wheels with 18' aftermarket after two weeks front suspension started making noise,stutter problem,engine mobiliser goes on when its bit windy which christchurch weather is always like that too annoying.Car has been brought from one of the reputable dealers in christchurch but there service has been shocking it has 6 months dealership warranty.I bought this car about 3.5 months ago from this time period my car was at dealers about 4 times roughly a month ??

Any advise wat to do further ??

as car is under 6 months warranty but it has got too many problems lkike when engine is hot,we turn car off and start it again it makes a clap sound from dashboard,i changed the factory wheels with 18' aftermarket after two weeks front suspension started making noise,stutter problem,engine mobiliser goes on when its bit windy which christchurch weather is always like that too annoying.Car has been brought from one of the reputable dealers in christchurch but there service has been shocking it has 6 months dealership warranty.I bought this car about 3.5 months ago from this time period my car was at dealers about 4 times roughly a month ??

Any advise wat to do further ??

Forgot to tell ya they imported this car for me from japan,when car arrived here in nz it had acid rain in paint (Roof,Boot lid).Right side doors were all heavily chipped.Bonnet was heavily chipped as well,I had to fight for this to get it fixed as i picked up my car on rainy day so cudnt see any paint blemishes.When i washed my car 1st time i saw all this shit.Car had very little brake fluid,took it back to them dey started saying its white paint on my car which they cudn't see it was acid rain.

Then other thing brake pedal pulsing,after another month,All the door lights,dome light,retractable mirrors stopped working.Car was at dealers again to get this problem fixed

mate you've had a shocka :-/

I think so as well but if my car is not right this time wen i go to pick it up as per Consumer acts i am gonna get money back dats it cz i hve had enough of it already in last 3 months

Dump it, this car is a total lemon
Hopefully tomorrow I get good news from Infiniti.
I'm worried though that the firmware will not fix it and instead its a "Oil gallery gasket" ?? Is that just a oil pan rubber gasket?

Edited by awsam

There are a few Orings they could be talking about, some in between the sump and block, some between the block and cam chain cover.

Unplugging those solenoids a couple of pages back is unlikely to make a difference to the affects of a damaged O-Ring/gasket?

Edited by awsam

It will stop the units actuating. At a guess if the advance/retard mechanism is banging the end of it's travel then the Orings will be fine, it will more likely just need camshaft degree reprogramming. There is a menu dedicated to cam actuation diagnostics on the consult 3. Things like oil viscosity and oil pressure will change the requirements for cam control away from the factory settings enough to require reprogramming of the pwm signal. These engines learn to some extent but there are definitely re-learn procedures your mech can try.

Failing that, I have heard of the hydraulic solenoids getting blocked inside, there is a fine gauze filter on them. If you are having problems with the electronic actuator though, then you may need to replace the advance/retard assembly as I mentioned earlier. Quite a common fault on the VQ25's.

Thanks for the extra info, sounds like more work than anyone I've come across in Adelaide is enthusiastic enough to investigate.
I really wish I could slap a bandaid on it and just f**k it off lol.

Hopefully Infiniti have finally got an answer for me tomorrow morning.

Infiniti just got in touch, they've finally been given permission to discuss the logistics with the department handling the update in Japan.

Yea mine is booked in for tommorow at Nissan dealership as well for ECU update and Throttle reset lets see what happens next fingers crossed

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Given you're running a 2.8 and my 2.5 is not really like for like, I suspect there could be a bit more timing you could give it. What is the kW yield per degree you're putting through it? Here's my E85 map to give you an idea, where it was I could still get another 3~4kW per degree thrown at it.  
    • It turns out that Setrab make a fan specifically for the oil cooler which is great and I've installed it with minimal swearing. I removed my 2x 12in push fans from the front of my aircon condenser and wired them into this. My main thermo fans kick on when I use the aircon anyway and would effectively already be working as puller fans through the condensor which is infront of the rad. The push fans (understandably) didn't really do much in the config they were previously in so now they're out. Now we're on to the "Oil fan doesn't really do much either!". Yes I'll duct it next if it does nothing in heavy use which it shouldn't. But hey, the object exists and fits great and is cool. Let me have this. The car is still in the "do my fittings leak oil now? do my wheels actually rub?" phase. I did a spirited drive on them and didn't hear or feel anything. Then I got back home and noticed there were grind marks on the inside of the rims, though I couldn't see where they were touching I got out the grinder and attacked the suspects. Note: I do not know how to use a grinder. Then I realised I had dragged my new rims across my concrete driveway before I did this drive. I didn't think I had damage at that time when I briefly looked...... but remembered this occurred after I did all the angle grinding. The grinding on the wheels in some very specific spots. It's not around the whole rim for example, which lines up with dragging it across concrete more than hitting a suspension component for even 1 full rotation. So everything is currently painted and taped up and I need to test it some more to see if it really IS rubbing, but from inside the car it doesn't feel like it is. In other news I attempted to do a before and after comparison of the heads/cam upgrade thing. Dynos lie, everything is in different measurements. Here is the data from the sandown back straight. Car go faster than before. Vroom vroom.
    • Here's my base ignition. +3 correction to redline when shooting water/meth which is always on. Looking at my old ignition table, I should be able to add 1-2 degree's next time I'm on the dyno.  Let me know your thoughts. 
    • Given what I know now - same haha, but this was 12 years ago with second hand 740cc Nismo injectors in my S15 daily, I was too busy hunting elsewhere for the issue to even look at the injectors, running through some cleaner was a happy coincidence haha
    • Not a terrible idea. But if I ever had concerns that my injectors were sufficiently dirty to be causing me a problem, they would be out of the engine and onto the actual injector cleaner/testing bench.
×
×
  • Create New...