Jump to content
SAU Community

Recommended Posts

That is disgusting. But for a car that's done 259,000km it's in damn good condition.. i see why the scumbags have snatched this one up.

edit: i've been searching through a whole bunch of importers stock lists and can't seem to find it.. wonder if it's waiting to be advertised.

Edited by Seano350GT

IMO why take this risk of getting a wound back/lemon when you can get Chef or Prestige Motorsport to import? Yes it will take time but if you are a car enthusiast, what's a little wait to get a good car for good value of your money?

IMO why take this risk of getting a wound back/lemon when you can get Chef or Prestige Motorsport to import? Yes it will take time but if you are a car enthusiast, what's a little wait to get a good car for good value of your money?

hey Colin, time is exactly it.

I'm not someone who just discovered imports a week ago, and have bought both locally and imported several times. So i know the pitfalls and potential traps. I've also been driving imports since back when people would see the GT badge on my 33, and ask me if this was the new falcon GT, and police would pull me over to have a chat about the car :)

The idea of this thread was to try and get some specific experiences so i don't have to spend two weeks driving around to every Sydney dealership to weed out the ones i wouldn't want to touch.

You guys don't have to convince me that there are great importers, i know this, and have used them. But if there is a legitimate car here, why wait 6 months to get my car on the road.

hey Colin, time is exactly it.

I'm not someone who just discovered imports a week ago, and have bought both locally and imported several times. So i know the pitfalls and potential traps. I've also been driving imports since back when people would see the GT badge on my 33, and ask me if this was the new falcon GT, and police would pull me over to have a chat about the car :)

The idea of this thread was to try and get some specific experiences so i don't have to spend two weeks driving around to every Sydney dealership to weed out the ones i wouldn't want to touch.

You guys don't have to convince me that there are great importers, i know this, and have used them. But if there is a legitimate car here, why wait 6 months to get my car on the road.

Yes I know what you mean. After looking around, I came to the conclusion that it was safer to import rather than getting it from a dealer here. Sure, there are some legitimate dealers here but there's also risk that the importer/agent they used could be dodgy? I was in the view that if I could eliminate as many middle people as possible, it would be less likely that I would be getting a lemon.

re: IMG recommendation

another mob ensuring not a single VIN for their jap car range is published online... do a lot of homework.

They gave me a copy of the auction sheet, all I had to do was ask

Of course you do your homework before buying any car let alone an import

Not all dealers are the same! There are some trying to do the right thing. The private people bringing cars in without Dealers Licenses are the ones that are bringing the industry down!! It's these guys that we have to compete with. Its these cars that should be used as examples as well as the dealers. Its also Compliance Centers without Dealers Licenses that are selling cars bringing the Industry down, I'm not going to mention anyone, but I can tell you that doing the right thing in this industry is really hard work and does not help when topics like this are targeting only dealers!!

Dodgy private sellers don't have an ABN, so they aren't dealers.

When you buy from a dealership, you expect a non-dodgy car. Hence why people pay the premium to reduce/eliminate risk.

If you're a dealership and are doing the right thing, threads like these won't affect you. This thread isn't a blanket attack on all dealerships, it's showing examples of buyer beware. If you (dealership) can provide supporting documents etc then you won't have any issues :).

My point of view anyway. I've been wanting to buy a V36 sedan for a while now. I rather drive the car first and check it out in person before handing over cash, which is where dealerships come in handy. Massive wind-backs are a big concern because 88,000km car sold as 40,000km will be driving way past the major service point. Etc etc.

The XX mark on the left side means panel replacement. It has been repaired from an accident that has affected left side of the car with structural repair.

Panel replacement without structural repair does not lead to R mark on auction and okay for compliance/roadworthy. Car with RA/R mark may or may not be roadworthy in AU

Edited by Zveruga

But but but

They said they now guaranteed all the cars they sell (nothing on consignment) and the previous issues have been addressed.

Oh man, I can't believe a dealer on Parramatta Rd would not be 100% genuine and trust worthy.

What is this world coming to?!?!

  • Like 1

They gave me a copy of the auction sheet, all I had to do was ask

Of course you do your homework before buying any car let alone an import

I'm with you Yo-Yo.

Got my V36 through IMG

Andrew and Gavin "exceeded expectations" all the way.

(Still have my auction sheet too).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The time is always correct. Only the date is wrong. It currently thinks it is January 19. Tomorrow it will say it is January 20. The date and time are ( should be ! ) retrieved from the GPS navigation system.
    • Buy yourself a set of easy outs. See if they will get a good bite in and unthread it.   Very very lucky the whole sender didn't let go while on the track and cost you a motor!
    • Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
    • Literally looks like direct port nitrous haha
×
×
  • Create New...