Jump to content
SAU Community

Recommended Posts

Am bringing about 6-7 S15's down... Its the annual MelbS15 DECA invasion for us :)

Boo!! I was shattered last time when I rocked up to see only one (Gold 33 GTS-T) Skyline participating! I think there were a couple of others that were running around in the morning but had finished by the time I got there.

Wish mine had an engine.... All this action on my door step but nothing to play with. Should pull out the Datto ute... Lacks horses though...

hi guys, want to join as my first track day and have a few questions:

is a cams l2s fine or has to be aasa license?

Is this a track day competition or skid pan?

How does it go with roll cage? any is fine? can i have a passenger without a roll cage?

Do they have tire fitting facilities if i bring my own tyres? also do they sell new tires there too?

Hi Andrew,

Cams L2S is fine, you'll also need to show your current Affiliated Car Club membership card (like SAU VIC for example), AASA is the other option...

It's skid pan with some Timed Back Track work, it's definately not a track day. Youtube for DECA Long Wang for examples of the Back Tracks...

Yes, Yes Yes... Do not have to have a cage to race, do not have to have a cage for passengers, it is not a high speed event... chances are the fastest you'll go on the day is about 130kmh on one part of the Long Wang...

No tyre fitting facilities, the skid pan generally does not chew through tyres too much, unless you're deliberately trying to destroy tyres, you won't need fitting facilities... I'd recommend bringing a spare pair of wheels for the rears if you're planning on driving back to Melbourne and think you'll be finishing a set off.

Thanks for the reply Simon, when you say i have to be a club member, is that a payed sau member or unpayed counts too?

Also do you know much on driving an unreg vehicle with a permit to deca?

Paid & entered :)

perzn_34 - you need to be a paid member of SAU-VIC to have access to obtaining a CAMS license.

& in regards to unreg vehicle permit - when I had my silvia on permit after I'd just imported it, it only allowed me to drive the car to & from workshops & vicroads for the purposed of repairs to gain a roadworthy certificate.
Basically if you get pulled up you have to be able to prove you a driving the car to either a workshop for roadworthy purposes or to vicroads for registration purposes - I don't like your chances of driving to DECA on a permit if you get pulled up.

Paid & entered :)

perzn_34 - you need to be a paid member of SAU-VIC to have access to obtaining a CAMS license.

& in regards to unreg vehicle permit - when I had my silvia on permit after I'd just imported it, it only allowed me to drive the car to & from workshops & vicroads for the purposed of repairs to gain a roadworthy certificate.

Basically if you get pulled up you have to be able to prove you a driving the car to either a workshop for roadworthy purposes or to vicroads for registration purposes - I don't like your chances of driving to DECA on a permit if you get pulled up.

Tell them you're taking it to Ken Muston Automotive (where I work here in Shepp) and you'll be right! "I promise officer, they're really good there!"

Guest
This topic is now closed to further replies.



  • Latest Posts

    • LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
×
×
  • Create New...