Jump to content
SAU Community

Recommended Posts

I thought i'd fire this up as it's been on my mind for a while as the las time I tripped across some old photo's of my car I nearly fell off the chair laughing at the morph.

Pretty easy to do this...go find you oldest pic and post up your latest pic.

So to fire it up here are mine!!

post-37023-0-50412700-1381220173_thumb.jpg

post-37023-0-12307700-1381220377_thumb.jpg

Wow some flash cars there. Mine looks worse now that when I bought it - needs the rust under the mirrors repair! But the cars above look so much better than boring old falcadores or camrys.

Back when I bought it - 8 years ago this month!

Stagea001.jpg

After lowering:

Wagon001.jpg

Most recent pic that I've got (and even this is a few years old and doesn't include the rear spoiler):

NewWheels1.jpg

Action shot, 31 January 2010:

WF4U8759.jpg

  • 2 weeks later...

Got a pic of your new setup today Craig.....looks unique

p5.jpg

I really don't have much to add for mine....I've had it for 7 years and the only mod you can see is the 34 gtr wheels and d2 brakes. Lots of other stuff on the inside tho.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
×
×
  • Create New...