Jump to content
SAU Community

Recommended Posts

My 32 is painted gold (bought like that) and it looks like a good paint job, other than they didn't tape it up very good. (A lot of spray) Whoever looked after the paintwork did a really bad job... If it ever was looked after. I'm using it as my test to cut & polish, but will be going through a couple of YouTube vids so I'm not completely hopeless. I'll chuck some before & after pics WHEN I do the deed. Only doing this because I will be getting a respray in the future.. Still tossing up between a darker gold or white..

Unfortunately this happens a lot where people just take a cut and polish to fix any paint issue and it ends up ruining your paint. Hope all goes well because sometimes a cut and polish is a must and seal with wax. If you get to that stage expect to wax it every 2 weeks or so.

Unfortunately this happens a lot where people just take a cut and polish to fix any paint issue and it ends up ruining your paint. Hope all goes well because sometimes a cut and polish is a must and seal with wax. If you get to that stage expect to wax it every 2 weeks or so.

Haha, yeah.. I'm pretty sure I will end up making it look worse :P

But, half of the paint has already been ground away to get rid of the rust :D

The issue with most detailing places is the firs thing they do is take a mild cut and polish to your car. RUINS your paint.

...or I recommend taking the time out and doing it yourself.

My detailer has a "Paint Thickness Gauge" which tells several stories - before even touching the car.

* How much paint he has to work with - or with the N1, not to work with.

* With sun damaged panels (horizontal ones), more latitude can be had with cut 'n polish within certain micron tolerances

* Panels which have been repainted will give off thicker readings

* Nicki (- sounds better than bog) can be detected in vulnerable spots

My detailer has a "Paint Thickness Gauge" which tells several stories - before even touching the car.

* How much paint he has to work with - or with the N1, not to work with.

* With sun damaged panels (horizontal ones), more latitude can be had with cut 'n polish within certain micron tolerances

* Panels which have been repainted will give off thicker readings

* Nicki (- sounds better than bog) can be detected in vulnerable spots

If you don't mind giving a ballpark figure, how much does it cost for someone to give the car that much attention to detail etc? Just curious really.

Eugene Chan charged me $400 (mates rates) for the two day weekend Jeremy.

EugeneDetail14.jpg

EugeneDetail6.jpg

EugeneDetail7.jpg

EugeneDetail13.jpg

EugeneDetail16.jpg

EugeneDetail22.jpg

Typical process was...

Wash > Clay Bar using Lubricant > Polish (Menzerna brand) 2x with different grade pads > Sealant (Optima brand) applied > Cure overnight > Wax (Meguiar's or Menzerna brand) > Buff

Eugene (aka JDM_Performance here on SAU) learned from Polich Doc in Melbourne. Eugene detailed my 3x R34 GT-Rs

#1 R34 GT-R Black won the Concours Skaife award at the R34 GT-R 10th Anniv

#2 R34 GT-R Bayside Blue (above) wasn't owned for very long before being forced to choose, upon the availability of an N1 - paint thickness on every panel was about 320 microns

#3 R34 GT-R White N1 in PI Magazine #161 - paint thickness on every panel was consistently about 90 microns

Yup, very happy with Eugene - but pretty far away from you guys I'm afraid.

  • Like 1

Yes it's impressive.

It won't work unless the panel is made of metal.

C/F, Nicki or rust with give lousy readings.

The Detailer has to love what he does - with a passion!

Eugene has that passion - yet he hates gardening.

I love gardening - but but hate detailing unless I'm totally in the mood and begin by 7am , Lol

Yes it's impressive.

It won't work unless the panel is made of metal.

C/F, Nicki or rust with give lousy readings.

The Detailer has to love what he does - with a passion!

Eugene has that passion - yet he hates gardening.

I love gardening - but but hate detailing unless I'm totally in the mood and begin by 7am , Lol

Thanks for the info Terry. Amazing job done on an amazing car. It's almost worth driving down to Sydney and then glad wrapping it for the trip home haha :P

If you let him detail your N1, then Eugene must be good.

Cheers for sharing.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...