Jump to content
SAU Community

Recommended Posts

1992 R32 Skyline GTS-t, RB20DET, 5 speed manual, 5 months rego, 11 months pink, Genuine 68,000 kms on engine and gearbox, stock motor, chassis has 120,000kms, HKS2530 turbo, Buddy Club race spec coil overs, no air con, car used for super sprints and club events only. Not a daily driver. 10 years of development put into this car, needs some bodywork, paint is average, refer photos. GTR grill, fibreglass front guards, K&N pod filter, cold air box and feed, Turbosmart bleed valve, Z32 airflow meter, Greddy intercooler, custom oil catch can with oil return, GFB plumb back blow off valve, Silicone turbo intake, Exedy heavy duty clutch, new rear hubs, battery relocated in boot, full aftermarket suspension control arms front and rear upper and lower, rose jointed , front homemade splitter, road tyres are 40% worn, DBA front rotors, 900 deg front pads, 700 deg rear pads, braided brake lines, Greddy oil cooler, whiteline front and rear sway bars, front camber arms, cradle pineapples, GTR 440cc injectors, GTR dropping resistor, Bosch 040 in tank hi flow fuel pump, short shift kit, 225kw @ wheels @ 16psi, 300km speedo, suede steering wheel, Apexi monster tacho with shift light. EPROM tune by Dr Drift. Alloy radiator, twin thermo fans, full silicone lines and hoses.Split stainless 3" front/ dump pipe, hi flow cat, HKS 3" cat back exhaust and cannon muffler, So much time and money put into this car over $25k spent, Lots of extras available depending on price. Some extras include Dmax style carbon bonnet, 17" Buddy club P1 race wheels with Kumho V70A semi slicks 245's, Autotecnica race seat. Call for details, no joyrides tolerated. Only serious buyers pls.

Best time around E.C. 1.49.35. Very regretful sale, hoping it finds a good home. Sale due to wife and buying a house. Still great on the road and is a sleeper, No mechanical issues, never been drifted or abused.

$7500, offers considered, no swaps.

Contact Andrew,

0404027957

[email protected]

post-32141-0-10262700-1383323278_thumb.jpg

post-32141-0-43984900-1383323292_thumb.jpg

post-32141-0-15699700-1383323304_thumb.jpg

post-32141-0-87300900-1383323318_thumb.jpg

post-32141-0-69403700-1383323341_thumb.jpg

post-32141-0-77072800-1383323355_thumb.jpg

post-32141-0-59832600-1383323370_thumb.jpg

post-32141-0-65399600-1383323389_thumb.jpg

post-32141-0-52599200-1383323404_thumb.jpg

post-32141-0-85037000-1383323417_thumb.jpg

post-32141-0-02643900-1383323431_thumb.jpg

post-32141-0-02870900-1383323450_thumb.jpg

post-32141-0-06452900-1383323468_thumb.jpg

post-32141-0-25327700-1383323490_thumb.jpg

post-32141-0-91871700-1383323507_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/434402-r32-skyline-gtst-rb20det-for-sale/
Share on other sites

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
×
×
  • Create New...