Jump to content
SAU Community

Recommended Posts

Need a RHS door mirror. Came back one day and noticed the black housing (part attached to the door/window) was cracked and mirror was hanging on its side :-( need to get the sorted ASAP. Epoxy and duct tape isn't holding very well.

Im located in Sydney btw.

  • 1 month later...

Hi Tai. Which side are you referring to as RHS? Passenger or driver? I'm after a silver mirror for the passenger side, but I don't want to hijack your post if we're after the same item... ;-)

Because if you are looking at the car front on, RHS is passenger. ..

Lol.. Left and Right are relative to the observer? :) I wish I had thought of that in school when the teacher said 'raise your right hand' :)

?? how can 'Right Hand Side' mean anything other than the drivers side?? (in Australia)

Hmm... you didn't try googling it before your comment I'd bet. There's threads on it, mainly because people aren't sure. So, if I ask the question in the post, then we're all on the same page. No harm, no cost.

So, I'm after a KY0 Brilliant Silver mirror for a Series II coupe (passenger, LHS) - I'm advised... :happy:

Edited by Stuart McK

sorry, I didn't intend to offend.. just was struggling (and still am) to understand how the RHS of a car or anything else could ever be anything but the RHS.. unless the front/rear of the object wasn't immediately obvious.

And your right.. I didn't Google, the idea that this was difficult to understand never crossed my mind..

Edited by sonicii

sorry, I didn't intend to offend.. just was struggling (and still am) to understand how the RHS of a car or anything else could ever be anything but the RHS.. unless the front/rear of the object wasn't immediately obvious.

And your right.. I didn't Google, the idea that this was difficult to understand never crossed my mind..

No problem. It's like Trav said - its a perspective thing. Anyway, I thought I'd ask.

And these suckers are harder to find 2nd-hand than I expected...

And these suckers are harder to find 2nd-hand than I expected...

It isn't like you are looking for an uncommon colour either!!

Maybe they are commonly damaged and therefore sought after??

Is it the same as a Stagea mirror? I have a silver M35 coming down here for wrecking soon...

Hi Scott. I really don't know but I checked out some images and I suspect the two models are different. I was also thinking that if the triangular mount was the same fit, if I got a pair it wouldn't matter but I'm not sure if that's the same either...

It's probably too big a risk, so thanks anyway. Stuart

Edited by Stuart McK
  • 2 weeks later...

OK team, I let my fingers do the typing and searched through Trading Post, Gumtree, eBay, japanese wreckers, etc for a used silver coupe mirror. No luck. However, I ended up finding this:

http://www.ebay.com/itm/03-07-G35-Coupe-2-Door-Door-Mirror-Right-Passenger-Power-Heated-/131083085130?pt=Motors_Car_Truck_Parts_Accessories&fits=Make%3AInfiniti%7CModel%3AG35&vxp=mtr&hash=item1e8529254a

Is black, but I could either paint it or leave it to see how it looks with other black trim on the car. Decided to run with the latter, so bought one for the other side to match. All up for heated mirror assembly both sides $180AUS shipped. The order was also shipped the same day so don't think I'll be waiting too long either.

I'll post what the quality is like when they arrive, if anyone is interested.

Umm. Do you realize left and right door mirrors are angled differently? If these are for a LHD car you might not be able to get the mirrors to adjust far enough to line the up for a RHD car.

Note- given previous posts, I thought I had better clarify Right hand drive is what we have in Aust. :)

Umm. Do you realize left and right door mirrors are angled differently? If these are for a LHD car you might not be able to get the mirrors to adjust far enough to line the up for a RHD car.

Note- given previous posts, I thought I had better clarify Right hand drive is what we have in Aust. :)

Interesting. Know that for a fact given that both sides are by design motor adjustable? Anyway, what is done is done. I could't get what I needed here...

yes, both sides are motor adjustable, but the physical housing is angled inward more when in the open position on the passenger side, so if the mirror is set central in the housing, it is roughly in the correct position for the driver. LHD mirror housing will be angled to be roughly correct for the passenger on a RHD car. The motor adjustment may have enough range to correct this, but it will likely be at the extent of the adjustment range.

If you are able to adjust them correctly, then it shouldn't be a big issue.. just thought I would let you know.

yes, both sides are motor adjustable, but the physical housing is angled inward more when in the open position on the passenger side, so if the mirror is set central in the housing, it is roughly in the correct position for the driver. LHD mirror housing will be angled to be roughly correct for the passenger on a RHD car. The motor adjustment may have enough range to correct this, but it will likely be at the extent of the adjustment range.

If you are able to adjust them correctly, then it shouldn't be a big issue.. just thought I would let you know.

OK, cheers. I'll just have to drive leaning more into the left side - or is that the right side? ;)

  • 1 month later...

Hi Stuart

What is the latest update on the mirrors? How is the positioning?

I'm in a similar predicament, my passenger side mirror has snapped off (I was in the city one night, came back from dinner and the mirror was hanging off, I think someone might have kicked it off)

I am also looking to buy from ebay from a US seller, but I am a bit concerned about the different positioning.

I wonder if its possible to use the black housing and screw my silver mirror on it, would save me the hassle of getting it painted silver.

Hi Tai. Which side are you referring to as RHS? Passenger or driver? I'm after a silver mirror for the passenger side, but I don't want to hijack your post if we're after the same item... ;-)

Hahaha sorry to bring up old posts but this cracked me up.... What side is the steering wheel on ??

/Sits back with popcorn

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Power steering is probably because someone has nuked the HICAS CU and you no longer have the variable power asist doing what it is supposed to. How much boost are you running? You are aware that any more than 10 psi on the stock ECU is just asking for it to go to full R&R (that's Rich & Retard, which is effectively Retarded and Retarded!) which kills all the power. Depending on the exact conditions, it can just be runnign on the fat and stupid end of the maps, then the conditions change, you make a little more boost and the ECU goes into panic.
    • @BuiltNotBought Just as GTSboy said.   If you want driveabilty and more low down torque..keep the stock runners. They are VERY good from a factory. I have them too on my RB25DET NEO and as a GTSboy i have fmic but with stock piping route(i have Blitz intercooler) Iam making around 320 BHP and the car pulls "hard" from like 2,5k all the way to 7k. I have it dyno tuned to mimic N/A power curve and making little less max torque due to the smallbox tranny. But driveability is very great. I had 350Nm below 3k so car feels very quick.   EDIT:  Not my channel but i saw this and i know that is what i want (and i have exactly this)  
    • Looking to sort out a couple of issues on my skyline  It recently was rebuilt, however rebuilder long story short did not give two flying effs about the work he did. So moving forward it's running but I have two persistent issues 1) it has a misfire / lag type of issue (was at higher RPMs but I had a dead piggy back ecu removed which improved it) now it's not as bad but still does it at random, I thought it may have been a boost issue I'm running an older turbosmart dual stage controller, turbosmart told me to try running off gate pressure however it still has a lag at random times. It has New MAF, maf plug, coil packs, sparks, CP harness.. injectors tested and cleaned. Factory ECU. 2) Power steering issue. It is tight as anything. Flushed power steering, rebuilt my pump because the bearing was shot. Flushed again still tight (mainly when parking and going slow into my driveway etc)  No kinks in hard lines, replaced the lines I could see had cracks. Still tough to steer.  I was told to shim a coin and place into the solenoid plug? Is there anything else. My steering angle sensor also has a issue. It's a used one I replaced, does it need to be calibrated? I feel like I've tried everything and this car is my voodoo doll.   
    • Holy shit... wow!!! I totally missed this
    • One main filter. Each tank has a prefilter to keep rocks and small children out, then the big main filter that also does water separation. Clogged the first one so bad it was like a rev limiter at 3200rpm. Literally just like dropping the throttle off and maintaining rpm!
×
×
  • Create New...