Jump to content
SAU Community

Recommended Posts

Hi guys, i have searched but found nothing recent, im looking for someone to do a front and rear wheel alignment on my gtr, who is good? im in the northern suburbs but will travel if its worth it. Im not after the cheapest i want the best, someone that knows what they are doing.

After a recent experience i will NEVER use PEDDERS SALISBURY ever again.

Any help appreciated

thanks

Link to comment
https://www.sau.com.au/forums/topic/434772-good-wheel-alignments-in-adelaide/
Share on other sites

Two places I've used in the past are Bridgestone on Gouger Street, and Blackwood Tyrepower.

Both listened to what I wanted rather than alligned to what they wanted.

Bridgestone also adjusted my camber kit and castor rods to the specs I wanted. It did cost more, but I was happy to pay for a result I was happy with. This was a few years ago, so not sure if the same people still run them.

Adelaide radial tyre in holden hill is the goods dude

This

Stay away from tyre power parafeild took 3 hours to allign my gtst with adjustable arms took exhaust off n wheels off n on ect very slow and shitty allignment

Tyrepower Blackwood if you're in the south, Adelaide Radial Tyre if you're in the north - been to both and both have done excellent alignments

-D

+1 for Adelaide Radial. They are a great bunch, always walked away satisfied.

+1 for SA Motorsport Tyres on Magill Rd.

very professional, know their stuff regarding alignment settings, and do a lot of motorsports setups. they went to the effort of spending time aligning very exactly; the most accurate alignment ive ever had done, perfect to the hundredth of degree/mm (!) (coilovers, camber arms and toe arms).

reasonably priced, friendly and provide good advice.

I have used Bob Jane's on Main North Road in prospect. They have always done good by me and very friendly staff who listen and inform you of what is happening. Clint is the guy there that does wheel alignments and he is a top bloke and very good at it :D

  • 2 weeks later...

I have used Bob Jane's on Main North Road in prospect. They have always done good by me and very friendly staff who listen and inform you of what is happening. Clint is the guy there that does wheel alignments and he is a top bloke and very good at it :D

X2 for clint, will talk your ear off but damn good guy.

ray the owner is also a champ.

Thanks for all input guys, much appreciated. Car ended up getting a not so good report card, couldnt be aligned properly due to slightly bent arms or knuckles all round, so gotta find another lot of knuckles, this also gives me the excuse to buy all new adjustable arms :yes:

where did you go Danny?

I wanted to go to adelaide radial tyre after all the responses here, but i couldnt get in on the only day i could manage to get time off work. pedders at ridgehaven near tea tree plaza were recommended to me by a few other people, and was convenient for me so i tried there.. He apparently works on some drift cars and gets a few jdm vehicles through there. He seemed to know what he was talking about, explained things really well and charged me bugger all because it couldnt be aligned properly. I was happy with the service even though it was a bad result.

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Lamb roast on Saturday will be different 🥲
    • They are under bucket shims. Tomei provides a test shim kit and then any measurement of shim required. 
    • I always wondered how you were supposed to buy a set of 24 buckets and somehow magically have every single one of them yield exactly the desired clearance. I would have thought you'd need to assemble a cam with either 12 "sample" or "example" buckets of known top thickness (or a single such sample/example 12 times over!!) measure clearances at every valve, and then do the usual math to work out what the actual "shimness" of each bucket needed to be, before buying the required buckets to make up he thicknesses that you didn't have on hand.
    • I now seem to be limited in power due to my rev limit/hydraulic lifters in my built RB25. I'm looking into converting over to Tomei solid lifters. Question for anyone that has done the conversion. I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  I don't know where I got this idea, as so far I see no mention of this in any of the Tomei documentation. It just states I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • I couldn't agree more. I should have started from the get-go with a NEO or solid bucket conversion. I started looking into converting over to solid lifters yesterday. Now for some reason I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  But I see no mention of this on any of the Tomei documentation. It just states that I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
×
×
  • Create New...