Jump to content
SAU Community

Recommended Posts

Hi guys, i have searched but found nothing recent, im looking for someone to do a front and rear wheel alignment on my gtr, who is good? im in the northern suburbs but will travel if its worth it. Im not after the cheapest i want the best, someone that knows what they are doing.

After a recent experience i will NEVER use PEDDERS SALISBURY ever again.

Any help appreciated

thanks

Link to comment
https://www.sau.com.au/forums/topic/434772-good-wheel-alignments-in-adelaide/
Share on other sites

Two places I've used in the past are Bridgestone on Gouger Street, and Blackwood Tyrepower.

Both listened to what I wanted rather than alligned to what they wanted.

Bridgestone also adjusted my camber kit and castor rods to the specs I wanted. It did cost more, but I was happy to pay for a result I was happy with. This was a few years ago, so not sure if the same people still run them.

Adelaide radial tyre in holden hill is the goods dude

This

Stay away from tyre power parafeild took 3 hours to allign my gtst with adjustable arms took exhaust off n wheels off n on ect very slow and shitty allignment

Tyrepower Blackwood if you're in the south, Adelaide Radial Tyre if you're in the north - been to both and both have done excellent alignments

-D

+1 for Adelaide Radial. They are a great bunch, always walked away satisfied.

+1 for SA Motorsport Tyres on Magill Rd.

very professional, know their stuff regarding alignment settings, and do a lot of motorsports setups. they went to the effort of spending time aligning very exactly; the most accurate alignment ive ever had done, perfect to the hundredth of degree/mm (!) (coilovers, camber arms and toe arms).

reasonably priced, friendly and provide good advice.

I have used Bob Jane's on Main North Road in prospect. They have always done good by me and very friendly staff who listen and inform you of what is happening. Clint is the guy there that does wheel alignments and he is a top bloke and very good at it :D

  • 2 weeks later...

I have used Bob Jane's on Main North Road in prospect. They have always done good by me and very friendly staff who listen and inform you of what is happening. Clint is the guy there that does wheel alignments and he is a top bloke and very good at it :D

X2 for clint, will talk your ear off but damn good guy.

ray the owner is also a champ.

Thanks for all input guys, much appreciated. Car ended up getting a not so good report card, couldnt be aligned properly due to slightly bent arms or knuckles all round, so gotta find another lot of knuckles, this also gives me the excuse to buy all new adjustable arms :yes:

where did you go Danny?

I wanted to go to adelaide radial tyre after all the responses here, but i couldnt get in on the only day i could manage to get time off work. pedders at ridgehaven near tea tree plaza were recommended to me by a few other people, and was convenient for me so i tried there.. He apparently works on some drift cars and gets a few jdm vehicles through there. He seemed to know what he was talking about, explained things really well and charged me bugger all because it couldnt be aligned properly. I was happy with the service even though it was a bad result.

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
×
×
  • Create New...