Jump to content
SAU Community

Recommended Posts

How did I misspell your name beyotch? your nick was skyzerr back then wasn't it?

there was a couple of days where the forums went offline... I blamed you guys for pissing em off, just as I was about to buy my first Skyline :( that's what i meant by shut down

Skylines Australia is born...

http://www.skylinesaustralia.com/forums/sh...thread.php?t=77

Post Number 22 is where the term Skylines Australia is first used.

Quickly followed by SDU-AU, SOZ (man who thought of that one?), SPranK (PranK's early hints at a dictatorship) and NSA (which still sounds like a cool FBI style name).

OI! Post number 21, thanks very much!! By me!! :boobies2:

I agree SDU went down hill something chronic when it got to political (hence why im not a member anymore) SAU forums seem to be more "on topic" and "knowledgeable".

Just to add im sure there is a few ppl around here from the old ezboard days many years ago (5?) the original birthplace of both forums :)

I think we need a reminder of our friend Mines_Datsun...  of course it was before my time here, but the way you guys carry on, i think he deserves a honorable mention, and give us a reminder of his sheer stupidity! thanks for taking the time to write this up funky

I second that...the original thread was deleted though :D

I joined in August 02, generally keep a low profile

  • 3 weeks later...

Things have changed even in the time I have joined, which isn't a massive amount of time really.

Seems the forums are getting a lot "younger" and the intelligence is dropping a little ;)

Don't think you would have got many of the types of threads you now get a couple of years back..

  • 1 month later...

interesting... especially digging up those old threads... i thought most of them was gone since the last server maintenance or something...

I thought by longitute/latitude nz is located closer to the south pole than tasmania? so that makes them really downunder?

i'm not old skool enuf? or cos i just dun postwhore enuf in wasteland?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • @Murray_Calavera  If I were an expert I wouldn't be in here looking for assistance.  I am extremely computer literate, have above average understanding on how things should be working and how they should tie together.  If I need to go to a professional tuner so be it, but I'd much rather learn and do things myself even if it means looking for some guidance along the way and blowing up a few engines. @GTSBoy  I was hoping it would be as simple as a large vacuum leak somewhere but I'm unable to find anything, all lines seem to be well capped or going where they need to be, and when removed there is vacuum felt on the tube.  It would be odd for the Haltech built in MAP to be faulty, the GTT tune I imported had it enabled from the start, I incorrectly assumed it was reading a signal from the stock MAP, but that doesn't exist.  After running a vacuum hose to the ECU the signal doesn't change more than 0.2 in either direction.   I'll probably upload a video of my settings tomorrow, as it stands I'm able to daily drive, but getting stuttering when giving it gas from idle, so pulling away from lights is a slow process of revving it up and feathering the clutch until its moving, then it will accelerate fine.  It sounds like I need to get to the bottom of the manifold pressure issue, but the ignition timing section is most intimidating to me and will probably let a pro do that part.  Tomorrow I'll try a different vacuum line to T off of, with any luck I selected one that was already bypassed during the DBW swap. @feartherb26  I do have +T in the works but wanted to wait until Spring to start with that swap since this is my good winter AWD vehicle.  When removing the butterfly, did it leave a bunch of holes in the manifold that you needed to plug?  I thought about removing it but assumed it would be a mess.   I notice no difference when capping the vacuum line to it or letting it do its thing.  This whole thing has convinced me to just get a forward facing manifold when the time comes though.
    • Update: tested my spark plugs that are supposed to be 5ohms with a 10% deviation and one gave me a 0 ohms reading and the rest were 3.9ohm<, so one bad and the others on their way out.
    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
×
×
  • Create New...