Jump to content
SAU Community

Recommended Posts

Depends on what one you get. I have not dealt with them personally but many people here swear by Hypergear. Where is kasko or Troy when you need them.......

haha!

with a turbo upgrade will injectors need to be done to?

Power?

What about suspension?

And a good diff isnt cheap. You cant use the power if you dont have a good diff.

Fix all the shtty bits first, then youll be broke again.

But your car will be reliable.

And yeah its:

turbo, boost controller, fuel pump, injectors (no rail or fpr needed), exhaust, Pod & cold air box, Nistune ecu. And a tune up.

Not cheap.

Did you fix that timing belt?

Its all for nothing if that belt goes.

Dont worry about shiny bits just yet.

post-89755-0-08082400-1385714793_thumb.jpg

Edited by D.I.Y. Mik

what sort of power increases will you see?

250rwkw is fairly common with the highflows. Though lately I've been seeing a lot of 270+ results, some even reaching 300+ on e85 with stock internals. As Anthony has already stated you will need supporting mods to achieve this :)

Depends on what one you get. I have not dealt with them personally but many people here swear by Hypergear. Where is kasko or Troy when you need them.......

I was getting drunk haha

Ello ello

Hypergears new high flow is his best turbo and its only $850 and should net you around 250-260kw

I'm running an SS1PU version and making 250kw but that's on 20psi.

You will need all the supporting mods though which adds up after a while.

-ECU

-AFM

-Fuel pump

-injectors

-metal intake

-boost controller

-boost gauge

-intercooler

-exhaust

And a tune

Sortout your suspension and alignment first. I your struggling to put down 150-170kw no point getting 250kw. i have 210rwkw atm and I can drive flatout without spining the wheels on average tires. I recommend front castor arms rear camber arms and a good alignment i run my alignment close to SKs specs but with slighlty more camber.

sweet thanks guys, nah im starting to think its not the timing belt, thinking its a pully that's out of line or to tight... I really hope its not the timing belt!

It is the timing belt.

sweet thanks guys, nah im starting to think its not the timing belt, thinking its a pully that's out of line or to tight... I really hope its not the timing belt!

Yeah, a timing belt idler or the tensioner.

Stop thinking about it and have a look before it breaks.

I got gates belt on and its to tight makes a noise when idling,

Also i just bought a plazmaman plenum and now i have to relocate the AAC somewhere and get the car tuned

if anyone had done a plazmaman plenum and relocated the AAC a help wound be good

It sounds like a Gates belt wound up too tight.

Yeah, a timing belt idler or the tensioner.

Stop thinking about it and have a look before it breaks.

both guys that have hurd the sound both agree with the timing belt, time to start saving.. so awkered dropping my mate off at formal just before with it fuly detailed and having that sound... it spun into second just before, if that says iits standed power or not..

its a bad feeling going to the formal of your school and not being able to attened :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Sorry to hear your HFM BM57 was faulty,  did you contact HFM I would hope they would be at least grateful for the information if there was some sort of manufacturing fault, you would hope they would be sympathetic even if your item was 2 years old if it had never been fitted. May I ask where it leaked from ?
    • Cats are called Bella, and Donna...  Like that poisonous plant And I remember your 2 monsters, I remember making a little bit of wee when you let them out... LOL I have already installed cat doors into the laundry where their kitty litter is, and the sun room, apart from the cat doors there's not going to be any permanent mounted stuff on the interior walls (interior doors are cheap and easy to replace) I will get a outdoor cat cage thingie once I finish the landscaping out back... https://catnip.com.au/ The only off limit areas are the main bedroom and the gym room....but, currently the cats are curled up in bed, in the main bedroom with the Mrs.....LOL, the off limits for the kittens to the main bedroom lasted about 5 minutes with Jackie I currently only have 1 free standing huge cat tree multiple level scratching post thingie in the lounge room, but, I will be getting another one soon now that I'm happy with the furniture layout in the back room and have a perfect spot for it  
    • All of this is making it seem clear that running the Coppermix twin was definitely the way to go, especially in hindsight with how insane tariffs have gotten and the strength of the USD vs yen at the time.
    • That sounds like no chance of even importing one for road registering then Now I see why Duncan wants to check LHD rules for Targa...   I wonder how "bolt in" the AWD would be if you got one imported from the US and swapped it to an AUD one
    • Not to mention they drive like a bucket of bolts! yuck!
×
×
  • Create New...