Jump to content
SAU Community

Recommended Posts

I am currently parting out a track r32 sedan. All prices a little bit negotiable, pickup from Toowoomba, potentially deliver to Gold Coast or Brisbane and I don't mind posting. Parts I have left are as follows;

  • RB25 Gear box (r33) great condition with short shifter - $1000
  • OS Giken twin plate clutch, recently rebuild never slipped, fantastic clutch - $500
  • S13 Tein HD Coilovers (10/12's) VGC no leaks - $1000
  • R32 sedan Racing Logic Coilover GC - $850
  • Genuine Garret 3076R .69 rear, 4" inlet, welded alloy 90 on comp. housing, have receipts for $1000 rebuild and flow, VGC, extremely responsive on a 25, made 485hp at tyres also, incl. dump pipe with V Band, incl. lines
  • Split Pulse 6 boost turbo manifold, Suit Rb25/20 dual gate ports VGC only on car for 3 track days - $950
  • Plazmaman inlet manifold rb25 (includes lower part of manifold and throttle body) VGC- $900
  • Tomei 1.2mm rb25 MLS Head gasket (best head gasket made IMO) unused still in plastic - $360 (rrp $480)
  • 2 x RB30 bottom ends including sump (great for 25/30 build) - $150 each
  • Custom made alloy radiator suit most Nissan's, I had it in an R32 really thick worked great - $250
  • average condition black front mount - $80
  • 3" turbo back exhaust twin 3" tip no mufflers or cat's - $250
  • GK Tech quick release with 20mm hub and GK tech deep dish steering wheel - $250
  • Cusco front upper camber arms 2 degrees neg - $150
  • Full set of adjustable arms front and rear R32 - $650
  • R200 with Nizmo 2 way centre PC - $750
  • 1 x Bride Brix drivers seat on rails- $250
  • R33 modified cross member - rack pushed forward, braced and re drilled for motor to be pushed back - $100
  • S14 aftermarket (long/strengthened) tie rod ends - $160
  • Engineered to Slide spacers for rack (more luck) - $60
  • Heaps of skid rims and tyres all 5 stud approx. 10 rims - 15 tyres - $220
  • R200 LSD - $150
  • R180 welded centre - $150
  • R 32 Shell - has rear cradle in with alloy subframe bushes, dash in tact with no cracks, couple of gauges, sheet metal rear, no rear seats etc. cool colour shitty paint, no crash history - $400
  • r32 sedan Cusco half cage bolt in, incl. all bolts and plates necessary for installation - $500
  • Whiteline front swaybar and bushes for r32, probably the best modification I made to the car IMO - $180
  • GTR rear sway bar and bushes - $150
  • Rota Gr6 rims with 9.5 +25 fronts and 10.5 +15's rear, 75% front's 50% rears, minor marks and scratches on all rims - $600
  • 2 x 044 bosch fuel pumps, 5L surge tank, 2 x Proflow reusable fuel filters and relevant fittings - $450
  • Greddy catch can and lines - $80
  • Big Drift Air filter 4" - $40
  • R32 fronted S13, big pumped guards a couple of adjustable arms, pillar gauges, hydro handbrake, shortened lower rear control arms, cool blue paint - $1000

Call for or text with queries Sean - 0438 454 756

post-120095-0-68600600-1390102699_thumb.jpg

post-120095-0-06744400-1390102707_thumb.jpg

post-120095-0-37932000-1390102714_thumb.jpg

post-120095-0-46654100-1390102720_thumb.jpg

post-120095-0-65651600-1390102723_thumb.jpg

post-120095-0-07406200-1390102732_thumb.jpg

post-120095-0-62749800-1390102743_thumb.jpg

post-120095-0-92951500-1390102751_thumb.jpg

post-120095-0-11099300-1390102759_thumb.jpg

post-120095-0-66249300-1390102771_thumb.jpg

  • Replies 42
  • Created
  • Last Reply

Top Posters In This Topic

  • 3 months later...

  • 2 x 044 bosch fuel pumps, 5L surge tank, 2 x Proflow reusable fuel filters and relevant fittings - $450

still for sale?

What plazamaman is it?

  • 2 x 044 bosch fuel pumps, 5L surge tank, 2 x Proflow reusable fuel filters and relevant fittings - $450
  • still for sale?
  • What plazamaman is it?

Fuel system is still for sale.

Not sure what you mean by what plazmaman is it? It is an rb25det plazmaman inlet manifold.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thanks mate, couldn't find in VIC, ended up ordering one from NSW, getting rwc to get new plates and registration done.
    • Before all the EFR fan boys come in, have a look at: https://www.garrettmotion.com/racing-and-performance/performance-catalog/turbo/g-series-ii-g30-825-58mm/ It also comes in a T4 1.06 divided housing. I would dare say if you want response & also decent power, this thing would chop.   AND apologies, just re-read your post, you've already bought the turbo... whatever you do, make sure you stick with divided housing and proper twin scroll manifold.
    • People have got to stop doing that. ShatGPT is not a search engine. It is a hallucination factory.   I also would recommend the 1.05. The .83 will "work" for you , in that it will be more responsive, but I think you'll find that it won't be anywhere near as good running it out to 8000rpm as the big housing will be.
    • Decided for the first time ever I would tow my car TO the track day on the same working theory as bringing tools and spares "if I have it I wont need it, but if I leave it behind i will 100% need it" all setup and ready to go out and try these A050 for the first time First session showed I needed to stiffen up the dampers a touch but still managed a few 1:21's without much effort. things were looking good. Came in a dropped the tyres down  to 26/28 as they had gotten to 35/33C from 22C cold The first lap of session two I managed to drop into 1:20's. Then in the second lap into the second session. Coming into T3 and I suddenly lost brake pedal followed by some huge rear end vibrations and scraping sounds. Got it back into the pits after session ended and found this. in the attached video, all of the wobble is in the hub its self, wheel is mint, and bearing feels tight. lKXLqpd - Imgur.mp4   Deciding it was a bent spindle I tried to find bearing/hub assembly locally but was unsuccessful so it was loaded back onto the trailer i luckily brought it on to drag it back home  
    • 1.05 you’ve gotta let it breath 
×
×
  • Create New...