Jump to content
SAU Community

Recommended Posts

OK, one guys reckons it a photchop.. here's his comments & reasoning.. I tend to agree.

1749-2.jpg

Ron B. - 6/17/2004 8:22:17 PM

Title: Definitely Photoshopped

Comment: Definitely PHOTOSHOPPED. Look at the interior of both of these cars through the windshield as well as the A-pillar detail. What sold me was the little horizontal line that is reflecting light in the rear seat area of both cars.

ok another one 4 photo shop check the left hand front window the reflection in it is still & not blurred as the car is moving in the 1st one the window is black & has no reflection at all then again the reflection of the photo car can be seen on the car also

but I say pics are :bs!:

Yup, so what chassis is that then hey??? X36???

Pffft, every week theres some 'tard (I wouldn't be suprised if it was a yank) whos just discovered Skylines last month who comes up with yet another misleading photochop.

At last people that agree with me, the modern Nissans look like recycled citreons, sh1t the French have been trying to sell their idea of what a car should look like to the world for decades, and the same design gets uglier with every passing year.

They might be able to build a motor or cook a frog, but they couldn't style a galvanised bucket.

http://www.renault.com/datamedia/doc/media..._Fluence_GB.pdf

Lets hear it for the French...Hooraaaay

Just another perfect example of a lazy car manufacturer, but they have a long way to go if they want to steal the "Top Spot" off General Motors.

Lets hear it for Renault...

CLAP,CLAP,CLAP...

I think you guys are on crack, that car looks alrite, better than the 350 and better than the dumpy v35, it's also definitely better than an r33 or r34, ie it doesn't have that sport sedan look. First half decent nissan I've seen in a while.

As much as I like skylines, they were never real lookers so that's an improvement to be honest.

The two picture are different cars btw, the angle and perspective is mildly different, just reference check any sections and you can tell, though elements of the second have been photoshoped into the first.

Well I like the first one, its nice and progressive. Sure it doesn't look like the 32,33,34 line, but did they look like a 30/31? Times change.

Secondly, some of you guys are kidding, like it or not renault bought nissan becauase they were going to go broke form making overengineered cars like skylines and silvias. If they'd left them alone they'd be in the same position as Mitsubishi are now. They just need to go thru a cycle of saving money so they can spend some elsewhere.

And the 350z is a great car.

First pic looks the same as the production car for the new skyline GTR.

I like the look of the first pic, looks like it's from the future and I really like that look, If i have the money when they come out I'd buy one straight away and bring over here.

It's two different cars thou, as parts on each car are different, look at the bonnets of each car for a start , the beveel in the bonnet of the first car would take a long long time to do, and hard to get right for each change in angle.

Also the angles of each car are complete different, if both cars were the same, then maybe but looking at the wheels the 2 cars are travelling are different speeds, the first car is going slower.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I don't think the shuffle can damage the turbos. It only happens at low shaft speeds and loads. It's just annoying (to some people - others are tickled by the effect) and it quite possibly reduces spool performance a little bit.
    • Oh dear. The panel beating needs to be done before the filler work. Do you have a photo of the dent before you started? Hard enough to not flex and only hit the high spots?  What do you mean it was just temporary? 
    • Can u check this way it works for power supply?
    • These coils draw 10amps that what i read online
    • I appreciate the detailed explanation, think I understand now. I spent the better part of last night reading what I could about shuffle and potential solutions. I had replaced the OEM twin turbo pipe with an alternate Y pipe that is separated further away from the turbo. The current one is from HKS and I had a previous pipe that was separated even further away, both have shuffle. I had heard that a divider can be welded in to the OEM pipe to remove turbulence, and figure that aftermarket pipes that are more separated would achieve the same thing. From what I read, most people with -10 turbos get shuffle due to their size, though it's a bit less common with -5s on a standard RB26. I think Nismoid mentioned somewhere it's because OEM recirculation piping is common in Australia with -5 cars. It seems that the recommendation tends to vary between a few options, which I've ordered in what I think is most feasible for me:  1. Retune the MAP or boost controller to try to eliminate shuffle 2. Install OEM recirculation piping 3. Something called a 'balance pipe' welded onto the exhaust manifolds. I don't know if kits for this are available, seems like pure fabrication work 4. simply go single turbo My current layout is as follows: Garrett 2860 -5s HKS Racing Suction intake MAF delete pipes HKS racing chamber intake piping hard intercooler piping,  ARC intercooler HKS SSQV BOV and pipe Haltech 2500 elite ECU and boost solenoid/controller HPI dump pipes OEM exhaust manifolds HKS VCAM step 1 and supporting head modifications Built 2.6 bottom end All OEM recirculation piping was removed, relevant areas sealed off I'll keep an eye out for any alternative solutions but can get started with this.  Only other question is, does shuffle harm the turbo (or anything else)? It seems like some people say your turbo shafts will explode because of the opposing forces after a while and others say they just live with it and adjust their pedal foot accordingly. 
×
×
  • Create New...