Jump to content
SAU Community

Recommended Posts

Up for sale is a full turbo kit for a RB25DET.

Kit consists of:

RB25 6Boost steam pipe exhaust manifold
Genuine Garret GT3540 ball bearing turbocharger with a 1.06 exhaust housing .70 A/R
Tial external wastegate with screamer pipe
Speedflow braided oil and water lines with fittings
Custom 4" stainless steel intake pipe with 5" long K&N air filter
Custom made 3" stainless steel dump and front pipe with O2 bung

Turbo has no shaft play what so ever and is in perfect condition. Only ever run on 10W40 Motul 300V Chrono oil.

Can also include the rest of the exhaust system which is a full 3.5" turbo back system with a Varex rear muffler which can be electronically closed to make car whisper quite.

$4000 for turbo kit or $4500 with full exhaust system as well.

This kit made 400rwkw on 1.5-1.6 bar of boost pressure on a fully built RB25.

System has a gorgeous deep note to it and when the wastegate cracks the screamer is extremely aggressive sounding.

You will not be dissapointed. Direct bolt on kit for a RB25 with nothing else required.

Would prefer local pick up in Townsville but for a serious buyer I will look into freight for them.

post-35676-0-86501200-1392085754_thumb.jpg

post-35676-0-81533600-1392085760_thumb.jpg

post-35676-0-14177700-1392085767_thumb.jpg

Will u separate?

Hmm didn't really want to but what were you interested in?

Parting out really? Whats the new project you have lined up? Are you making a for sale thread?

Yeah parting this one out (this aint PMR33, I parted that one a few years ago lol). This one was just a drag car.

Doing a dedicated track car, LS1 powered S15.

I have another part out thread here:

http://www.skylinesaustralia.com/forums/topic/439458-fs-wrecking-1996-r33-gtst-white-townsville/

  • 2 weeks later...

If we could do:

Adz: 6 boost and tial gate - $1500

Sheldon: Intake, filter, turbo, lines, dump pipe - $1500

Or something I'd be happy.

Price drop to $3000 for the lot or $1500 for manifold, wastegate, screamer pipe and $1500 for turbo, lines/fittings, intake pipe, filter and dump pipe :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
    • Unsolicited advice? Keep the engine as close to stock as you can. Nothing wrong with adding some boost and making a little more power, but given where you are, you really don't want to try to make it into a monster. I can't imagine the roads are up to it, and the lack of locla support when it grenades will be a ball ache. FWIW, If there is a dyno around that you can access, then brand new injectors are a good idea, which will lead you to (at least) putting a Nistune in it, which will allow you to put an R35 AFM on it, all of which will make it possible to make it much much nicer to drive and live with.
×
×
  • Create New...