Jump to content
SAU Community

Recommended Posts

Hey guys quick question for ya'll.

Just traded my n/a S13 for an R32 Gtst a month or two back. Sweet ride dope deal on my end only downfall is its auto, gotta change dat shit! Pretty stock, wider wheels, fmic, blow off etc.

Anyway I have noticed I have really bad understeer when driving in the wet. I literally have to slow down to 20km/h to get around a roundabout without the front wheels locking up on me. Its realy wierd since the first thing that kicked out in the s13 was the rear haha. In the dry its fine.. Anyways just wondering if anyone may have an answer for me or something of use i could do.

Cheers guys

Link to comment
https://www.sau.com.au/forums/topic/439078-severe-understeer/
Share on other sites

thats odd - try tyres and alignment for sure - last track day i had - my rear end went out, shifting from 4th to third- soon as the clutch came out bam so did the rear end -

hope you fix it - bugger if i would be driving it in the wet if its that bad

I used to own a 4WS Prelude daily and in the wet it couldn't follow a Vectra around a simple corner.

Damn Nankangs needed changing despite 70%

Yeah, cheap tyres, including a lot of the chinese stuff (ling long, nankang etc) are horrible even with tread.

OP check out what tyres you have, and what pressure they're running and post back.

I use to have some no brand chinese tyres on the old XR6's rear, 1 drop of rain and i could have walked faster around a roundabout without getting some serious drift angle happening, it was so bad that i stopped the family driving it till i changed them.

There would be no g force through the car sideways, you would swear it would have been impossible to get a car sliding at those slow speeds, yet going around at a stupidly slow speed yet the rear would just break out in a blink of a eye.....

Dont buy no name chines tyres, tyre shops are selling them everwhere, they are death traps.

Makes me wonder how many people have been booked under the hoon laws with them or wraped the car around a pole and been told by the police they were driving like idiots and charged.

I can see how that goes down with a cop who just pulled you over for sideways action.

"I swear sir its these new nangkangs, says the guy who bashed limiter at full lock"

Nah but seriously. shit tyres are shit

Even the khumo ku31 on my pulsar had zero wet traction with 50% tread

  • Like 1

Cheers for the replies guys appreciate it. Checked the front tyres, a brand called kinforrest? Never heard of it so I'm assuming they're rubbish and I'll replace them as soon as possible. Approx 60 % worn with more wear on the inside. Will ask my mechanic friend to take a good look at it once new tyres and wheel balance and alignment has been done.

Kinforest are terrible.

i had bald rears on the XR6T and brand new (2000km old) kinforest on the front.

in the wet i could turn the wheel, step hard on the throttle and the rear still had more grip and the car would go straight.

i didn't even bother to wear them out, at 3000km old i left them at a Bob Jane, told them to do what they want with them, except resell them.

change tyres, under steer be gone!

Cheers for the replies guys appreciate it. Checked the front tyres, a brand called kinforrest? Never heard of it so I'm assuming they're rubbish and I'll replace them as soon as possible. Approx 60 % worn with more wear on the inside. Will ask my mechanic friend to take a good look at it once new tyres and wheel balance and alignment has been done.

Sounds like you should check your control arms and bushings if there is uneven wear. No point prematurely wearing through new tyres before its fixed.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Given you're running a 2.8 and my 2.5 is not really like for like, I suspect there could be a bit more timing you could give it. What is the kW yield per degree you're putting through it? Here's my E85 map to give you an idea, where it was I could still get another 3~4kW per degree thrown at it.  
    • It turns out that Setrab make a fan specifically for the oil cooler which is great and I've installed it with minimal swearing. I removed my 2x 12in push fans from the front of my aircon condenser and wired them into this. My main thermo fans kick on when I use the aircon anyway and would effectively already be working as puller fans through the condensor which is infront of the rad. The push fans (understandably) didn't really do much in the config they were previously in so now they're out. Now we're on to the "Oil fan doesn't really do much either!". Yes I'll duct it next if it does nothing in heavy use which it shouldn't. But hey, the object exists and fits great and is cool. Let me have this. The car is still in the "do my fittings leak oil now? do my wheels actually rub?" phase. I did a spirited drive on them and didn't hear or feel anything. Then I got back home and noticed there were grind marks on the inside of the rims, though I couldn't see where they were touching I got out the grinder and attacked the suspects. Note: I do not know how to use a grinder. Then I realised I had dragged my new rims across my concrete driveway before I did this drive. I didn't think I had damage at that time when I briefly looked...... but remembered this occurred after I did all the angle grinding. The grinding on the wheels in some very specific spots. It's not around the whole rim for example, which lines up with dragging it across concrete more than hitting a suspension component for even 1 full rotation. So everything is currently painted and taped up and I need to test it some more to see if it really IS rubbing, but from inside the car it doesn't feel like it is. In other news I attempted to do a before and after comparison of the heads/cam upgrade thing. Dynos lie, everything is in different measurements. Here is the data from the sandown back straight. Car go faster than before. Vroom vroom.
    • Here's my base ignition. +3 correction to redline when shooting water/meth which is always on. Looking at my old ignition table, I should be able to add 1-2 degree's next time I'm on the dyno.  Let me know your thoughts. 
    • Given what I know now - same haha, but this was 12 years ago with second hand 740cc Nismo injectors in my S15 daily, I was too busy hunting elsewhere for the issue to even look at the injectors, running through some cleaner was a happy coincidence haha
    • Not a terrible idea. But if I ever had concerns that my injectors were sufficiently dirty to be causing me a problem, they would be out of the engine and onto the actual injector cleaner/testing bench.
×
×
  • Create New...