Jump to content
SAU Community

Recommended Posts

Hey guys quick question for ya'll.

Just traded my n/a S13 for an R32 Gtst a month or two back. Sweet ride dope deal on my end only downfall is its auto, gotta change dat shit! Pretty stock, wider wheels, fmic, blow off etc.

Anyway I have noticed I have really bad understeer when driving in the wet. I literally have to slow down to 20km/h to get around a roundabout without the front wheels locking up on me. Its realy wierd since the first thing that kicked out in the s13 was the rear haha. In the dry its fine.. Anyways just wondering if anyone may have an answer for me or something of use i could do.

Cheers guys

Link to comment
https://www.sau.com.au/forums/topic/439078-severe-understeer/
Share on other sites

thats odd - try tyres and alignment for sure - last track day i had - my rear end went out, shifting from 4th to third- soon as the clutch came out bam so did the rear end -

hope you fix it - bugger if i would be driving it in the wet if its that bad

I used to own a 4WS Prelude daily and in the wet it couldn't follow a Vectra around a simple corner.

Damn Nankangs needed changing despite 70%

Yeah, cheap tyres, including a lot of the chinese stuff (ling long, nankang etc) are horrible even with tread.

OP check out what tyres you have, and what pressure they're running and post back.

I use to have some no brand chinese tyres on the old XR6's rear, 1 drop of rain and i could have walked faster around a roundabout without getting some serious drift angle happening, it was so bad that i stopped the family driving it till i changed them.

There would be no g force through the car sideways, you would swear it would have been impossible to get a car sliding at those slow speeds, yet going around at a stupidly slow speed yet the rear would just break out in a blink of a eye.....

Dont buy no name chines tyres, tyre shops are selling them everwhere, they are death traps.

Makes me wonder how many people have been booked under the hoon laws with them or wraped the car around a pole and been told by the police they were driving like idiots and charged.

I can see how that goes down with a cop who just pulled you over for sideways action.

"I swear sir its these new nangkangs, says the guy who bashed limiter at full lock"

Nah but seriously. shit tyres are shit

Even the khumo ku31 on my pulsar had zero wet traction with 50% tread

  • Like 1

Cheers for the replies guys appreciate it. Checked the front tyres, a brand called kinforrest? Never heard of it so I'm assuming they're rubbish and I'll replace them as soon as possible. Approx 60 % worn with more wear on the inside. Will ask my mechanic friend to take a good look at it once new tyres and wheel balance and alignment has been done.

Kinforest are terrible.

i had bald rears on the XR6T and brand new (2000km old) kinforest on the front.

in the wet i could turn the wheel, step hard on the throttle and the rear still had more grip and the car would go straight.

i didn't even bother to wear them out, at 3000km old i left them at a Bob Jane, told them to do what they want with them, except resell them.

change tyres, under steer be gone!

Cheers for the replies guys appreciate it. Checked the front tyres, a brand called kinforrest? Never heard of it so I'm assuming they're rubbish and I'll replace them as soon as possible. Approx 60 % worn with more wear on the inside. Will ask my mechanic friend to take a good look at it once new tyres and wheel balance and alignment has been done.

Sounds like you should check your control arms and bushings if there is uneven wear. No point prematurely wearing through new tyres before its fixed.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Before starting any work, we attempted to adjust the tune. However even after adjusting it to certain extremes like completely stopping fuel, it had no effect. What fixed it was removing the Nistune Board and installing the original EPROM instead. This immediately fixed the issue. Everything should have been fine with the Nistune Board installation, so I am unsure why it has caused a problem. The soldered connector is also properly soldered. This worked when I first got the 550cc injectors, before cleaning, but that may have been a coincidence.  We ended up not installing the fuel pump hanger (at least for now). So currently running stock injectors, stock fuel pump, stock fuel pump hanger – Well everything stock except the exhaust. Now I have around €1400 in Nistune, Injectors, and Hanger collecting dust for the time being, perhaps I'll install them in the future. For now I'll enjoy the car as is 😁 Thanks a lot for all your assistance, I really appreciate all the help you have given me.
    • The turbo can’t be the issue. They’re proven to make much much power than you’re making. There is something in the setup that isn’t correct. - has the exhaust got any silly step downs? - what exhaust manifold?
    • Ok, just the way you wrote it made it look like you had the stagger the wrong way around 
    • I was getting anxious with the DVLA not knowing if the paperwork is fine or not, so I rang them. No update had been given, but I  was reassured that providing the box was ticked on the V750 then the application will go through fine. I've been checking the DVLA website pretty much every day, in the hope that it would have been done. Fast forward to Monday 29th  and I was greeted with a new screen on the check, and it finally showed as Taxed and MOT'd, woohoo! The car was in desperate need of a clean, not knowing when this day was coming it was put off. As far as I was concerned I had another 3 weeks  I'm not normally one for using snow foam, but I wanted to give it another try It hasn't cleaned up too bad considering it's 21 years old and lived on a boat for a number of weeks. The personalised number plate is J2 XBK, an illegally spaced number plate would have it read J2X BK. BK could either represent  the colour black or Baker, which is my surname. I filmed the first drive, the Youtube link will be at the end. I used the same driving route I did with the 323F V6 when I had a new exhaust installed, heres a couple of photos A few more since then Youtube video can be viewed here: https://www.youtube.com/watch?v=TjkFHPzjGDw
×
×
  • Create New...