Jump to content
SAU Community

Recommended Posts

So did you push the car through some corners? Understand if you didn't as its not your car ;) On tighter tracks an evo is leagues ahead. On a more open track the Big R will lay waste to an evo HP pending of course lol

I did and it does. Though my car is pretty much set up properly as well.

Edited by Mick_o

As an owner of 3 Emos previously (6, 7 & an 8) and now have an R33 GTR I'd say go the GTR! But... and it's a big butt:

You need deep pockets to run a GTR as they have huge weight & power & that equals many sets of tyres & brakes. Plus they arent cheap to fix/maintain full stop.

The Evo's only ever lasted 6 months & I got bored. the 6 speed gearbox made the 8 so much better than the 6 & 7 I had but the handling was still 1 dimensional & boring on a track. However, on the road the Evos are more playful & more fun for it than the GTR by miles! The GTR feels too big & slow to respond...

Not sure I've helped here...

My work is done.

Not at all lol

The car will be mainly used for track duties with the odd occasion of going for a cruise. Ive come to the conclusion that I need to just go and drive a couple, I'm sure one will jump out at me more then the rest.

Ordinary is that your GTR videos on YouTube ?? Ordinarydriver ??? I assume it is.

The only thing that sways me to a EVO is the cost of running and mechanical strength at the track. Cheaper to run, cheaper to fix and just as quick.

But then again GTR's seem pretty bullet proof upto 250awkw, besides the oil starvation issue at the track and filling upto the bump in the stick seems to fix that problem.

Last thing I want is to spend around 20k on a car then need to spend another 10k on an engine rebuild in a year or so. This is where the Evo seems to have the edge in reliability. But then again anything can happen at the track.

The only thing that sways me to a EVO is the cost of running and mechanical strength at the track. Cheaper to run, cheaper to fix and just as quick.

But then again GTR's seem pretty bullet proof upto 250awkw, besides the oil starvation issue at the track and filling upto the bump in the stick seems to fix that problem.

Last thing I want is to spend around 20k on a car then need to spend another 10k on an engine rebuild in a year or so. This is where the Evo seems to have the edge in reliability. But then again anything can happen at the track.

How much have you tracked before if you don't mind me asking?

A stock gtr vs stock evo umm yes an evo is leagues ahead. .. A Stock GTR is a nugget ;)

Only cos Nissan got lazy and sat on their asses. Look at the incremental development with the evo over the years and compare that to the GTR. An R34 isn't that much better over an R32.

& of course your 9 is a couple generations younger than even the latest model R34.

Evo doesn't hold a candle to a GTR in terms of road presence too.

Dollar for dollar though, evo does win hands down. A 20k evo 8 would go a lot better round a track than a 20k 32GTR.

I 100% agree with that mate nothing says gtfo of my way like a GTR does on the road and on the track too! :D

I might be slightly biased to an evo owning 1 But pretty much all my mates own gtrs and i LOVE THEM so dont think im hating on GTR'S for a second here but im sorry reality is an evo is a better track car.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...