Jump to content
SAU Community

Recommended Posts

Hey guys I have had my r34 sitting for about a week due to not driving it any more.

First time taking it for a drive and I cannot get into the car with either the central locking or the key itself.

Just can't get more then half way with the key on both doors. Worked fine a week ago with central locking.

But now with that I only get one beep and that's to arm the alarm. No two beeps for unlocking.

I don't hear any locking mechanisms going at all

Boot lock turns and works.

Also

I have had a new battery fitted recently.

Link to comment
https://www.sau.com.au/forums/topic/439505-r34-gtt-wont-open/
Share on other sites

That's freaky.

The key should still work but trip the Alarm. At least it does with mine.

There is no way the key should not work in the door locks - not possible (as it is physical).

When you say new battery. Do you mean in the Fob or the car battery?

I have replaced both previously with no issues.

Sounds to me like the frequency has changed for the unlock motion :(

Edit: By the way I have a 34 GTT also

Edited by Sinista32

Try spraying some lubricant into the lock barrel with the key partly in and give it a try. Dirt and crap gets into them and if haven't been used in a while can make them hard to turn.

Tried the WD40 in the barrel with no luck. I have had this car for a while, so this is completely out of the ordinary.

Will try the battery tomorrow. Any ideas of how to get the bonnet up without getting access to the car?

  • 5 years later...

Sorry to dig up an old thread but this is happening to me right now. And it's got me stumped. 

I bought my r34 gtt end of last year and only have opened the car using the central locking. 

I had a flat battery in the car after leaving it over the Xmas and new yrs holidays. The car wouldn't unlock using central locking. So automatically I went to try open the car door using the key, and both doors won't unlock using the key. Tried the boot and it opened fine. So I called the previous owner and asked if he had problems unlocking the doors with the key, in which he replied he's had flat battery before and the door unlocked fine with the key... 

Anyway, I ended up unlatching the hood and put jumper leads on the battery to another car to unlock the gtt with central locking remote. 

But the key still won't turn on both doors... 

Any ideas? 

(I don't have a spare key) 

Le sigh.

If the key won't turn the barrel, then either they don't go together, or the mechanisms in the doors are jammed. The first is 1000000% more likely than that both doors have f**ked up in the same way. Nevertheless, you could take the door cards off, and check out the locking rods, clips, pivots and so on and spray some lithium grease on them and see what's happening. In fact, if you take the cards off and then use the internal lock mechanisms (near the inner door handle) you should be able to see if the only possible thing that could be wrong is that the lock barrels won't turn.

Then you get a locksmith.

And FFS. You've had the car 2 years and haven't attempted to get a spare key?!!!

50 minutes ago, GTSBoy said:

You've had the car 2 years

 

2 hours ago, leej84 said:

bought my r34 gtt end of last year


3 weeks? 
 

the old called the previous owner.... I wouldn’t answer, deal done 1 2 warranty.

Yes, I've had the car for about 3 weeks and went on holidays during Xmas and new yrs. 

The previous owner has actually been very helpful and there's no reason for him to lie. I don't expect him to fix the problem anyway. 

I guess I'll open up the door cards to see what's going on.

Being a Skyline (ie cop bait and thieving prick bait) there is a very high possibility that it has been broken into at some point.  The owner possibly replaced the barrels with a new (or used) set or they re-coded the door barrels without re-coding the whole car (which they should do).

Whip the door trims off, pull the locks out and drop them to the locksmith to be matched to the key or replaced and recoded if they are stuffed.  I agree with GTSBoy that it's unlikely BOTH sides are worn out as the passenger side door lock would be very infrequently (if ever) used, even more so on a car equipped with remote central locking!

Good luck!

  • Thanks 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...