Jump to content
SAU Community

Do I Need To Roll The Guards On My 32 Gtr For 18X10's

boobeedoobee
 Share

Recommended Posts

MrStabby Grand Master

MrStabby

Posted
Posted

The offset seems a little high, might hit the struts?

Yeah, you could trial fit a wheel to see if it clears without a tyre, and see how much clearance to the strut you'll have for a tyre. Might as well try both front and back. IIRC front will be the interesting end.

boobeedoobee Community Regular

boobeedoobee

Posted
  • Author
Posted

Um....in your first post you told us you were getting +35 offset, and now you're leaving it up to them. Say what?

Yes I did.. but after some replies I rang the Tyre shop and they said they tell yokohama what the wheels are for and they will send the correct offset for that car in the size I want 18x10

Duncan Grand Master

Duncan

Posted
Posted

I was going to say.....no wonder guard rolling was required :P

But can anyone confirm 18x10 +20 does fit the front of a 32 without rolling?

For OP, if the wheel sits too far in you can always fix it with spacers...if it is too far out there is not much you can do without compromising your wheel alignment.

niZmO_Man Grand Master

niZmO_Man

Posted
Posted

Tyre size 265/35/18:

Rears required rolling (approx. -1.5° camber).

Front, rounded sidewall design (Potenza TS02), -2° camber, just fitted without rolling. Changed tyres to a squarer sidewall (Falken FK452) and rolling was required.

Duncan Grand Master

Duncan

Posted
Posted

Tyre size 265/35/18:

Rears required rolling (approx. -1.5° camber).

Front, rounded sidewall design (Potenza TS02), -2° camber, just fitted without rolling. Changed tyres to a squarer sidewall (Falken FK452) and rolling was required.

sorry was that for 18x10+20? ie fronts and rears needed a roll.

If so, I don't get why people go 18x10+15 which are even worse??

  • 2 weeks later...
ls128 Collaborator

ls128

Posted
Posted

I have 18x10+20 with 255/35/18 and no guard rolling was required. Front or Rear. Fronts scrubbed a teeny bit on the inner guard plastic..for one day.

Edit on a R32 GTR.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GoHashiriya
      R34 Skyline Sunroof Won't Tilt/Vent

      By GoHashiriya · Posted

      Actually, that's not entirely true. It's also the same motor in the 1st gen Nissan Cube but they're rare as hen's teeth.  
    • Duncan
      Unknown sound similar to BOV on positive boost with partial throttle RB26

      By Duncan · Posted

      Yeah it is always worth testing and balancing actuators out of the box, just set the pressure regulator on a compressor very low (eg 5 psi) and increase it slowly to see when they both move.....unfortunately while you may be able to adjust the length of the actuator rod to minimise any difference, the actual pressure they move from is not adjustable so you need a well matched pair. And yes, the VCAM is probably contributing; the earlier in the rev range they come on boost and the slower the revs build (I think your demo was in 5th), the more you notice it.  Driving at WOT through 1st, 2nd, 3rd etc you will probably never hear it as any shuffling starts and is over super quickly
    • Dose Pipe Sutututu
      Shoota's R33 GT-R RB30/26

      By Dose Pipe Sutututu · Posted

      oh they were with that motor, you need to remove the engine to change the spark plugs (don't have to, but it does make it easier)
    • nouveau_poor
      Unknown sound similar to BOV on positive boost with partial throttle RB26

      By nouveau_poor · Posted

      I certainly fall into the annoyed camp, but glad to hear that if it's happening at low boost then I'm not likely going to blow a turbo and end up with metal shards in my oil. Just feels like it prevents me from really driving it without hesitation and "peak" performance. Wonder if it's the VCAM, it did an impressive job of shifting the torque curve and faster spool, but maybe now it's "too fast" and there's too much air for how open the throttle is.  Based on some other threads, will also do some reading on synchronizing the actuators. They are the default actuators that come on the Garrett's and I would think they would be set the same coming from the factory, but if the turbos don't actually work exactly the same way at the same time as previously mentioned, it would be worth making sure the actuators are actuating together properly
    • GoHashiriya
      R34 Skyline Sunroof Won't Tilt/Vent

      By GoHashiriya · Posted

      I went down this rabbit hole before, ended up sourcing a motor from the UK (I'm in Japan) which also didn't function correctly. With the original motor, I disassembled it and reassembled it and it works somewhat, sometimes. What I could deduce from all my screwing around is that there is calibration of the gears on the inside of the motor and two ramps on the main gear which activate switches that operate the motor and move the sunroof either to retract into the roof or tilt. Where I got stuck was that, it seemed in my case that one or both of the switches that are activated by the ramp on the gear did not always activate and thus the motor did not move, causing it to sometimes not retract or tilt (apologies, I've forgotten which way it didn't work.).  Of course this part is discontinued at Nissan now, it's the same part in the S15 but no other models. I also contacted the manufacturer of the component for schematics - forgot the name, they're based in Gifu - but they declined to share the information due to being bound by an NDA, sadly. Looking through my pictures now, it seems I last had a crack at this in 2022. See, I so kindly wrote "open" and "close" next to the switches. If you figure it out, please do tell me. Those little switches, with the red buttons may need to be replaced.
×
×
  • Create New...