Jump to content
SAU Community

Recommended Posts

I've just recently bought an r33 gtst series 2 (1996). It currently has 360rwkw on eflex.

Current setup...

Greddy plenum

740cc side feed injectors

Blitz front mount

6boost manifold

Gt3582r

Walbro intank

Surge tank

Aeromotive A1000 fuel pump

And other bits and peices...

So I want to make about 450-500rwkw.

Im going to get an eflex sensor to be able to run up to 85% ethenol and 98 in emergancies.

This is what I want to do...

Head

Supertech 1mm over sized valves(purchased)

Supertech Valve springs (purchased)

Supertech titanium retainers(purchased)

Tomei valve guides

Tomei 270 8.8mm lift cams(purchased)

Tomei 1.5mm metal head gasket(purchased)

ARP 2000 head studs(purchased)

Tomei inlet and exhaust cam gears(purchased)

Bottom end

Spool rebuild kit with CP pistons

Has acl race series bearings and spool conrods etc.

Spool high volume sump

Can someone recommend an oil pump?

New water pump N1?

ARP 2000 main studs

Fuel

Bosch 2200cc injectors (purchased)

Billet fuel rail(purchased)

Walbro 460lph e85 friendly pump

Also will be going larger precision turbo but thats another story.

This list is not exhaustive and any input and opinions would be appreciated.

Are my power figures acheivable and relatively reliable?

Please let me know if I'm on the right track.

Link to comment
https://www.sau.com.au/forums/topic/441723-building-tough-rb25-opinions-pls/
Share on other sites

I know what your saying, I was thinking of doing a 30 bottom end but I just love a highly strung rb25.

what's wrong with a highly strung RB30? lol

it will make more power under the curve and bring any turbo on earlier than a Rb25

what's wrong with a highly strung RB30? lol

it will make more power under the curve and bring any turbo on earlier than a Rb25

Aaagh. Now you have me thinking again! Lol.

Well the head is pretty much sorted I'll look into the 30 bottom end. What do you recken of the spool rb30 bottom end package??

It looks reasonable...

Would I have clearence issues between my 6boost manifold and the block??

Sorry mate, I just took it for granted that any reasonable person would have all machine work (porting and so on) done when their doing a build like this.

Thats why I didn't mention it.

Can't assume people are reasonable on here!

And I wouldn't group porting with machine work, but whatever.

Aaagh. Now you have me thinking again! Lol.

Well the head is pretty much sorted I'll look into the 30 bottom end. What do you recken of the spool rb30 bottom end package??

It looks reasonable...

Would I have clearence issues between my 6boost manifold and the block??

go here:

http://www.skylinesaustralia.com/forums/forum/184-rb30-conversions/

I would suggest going some more modern injectors. Go top Feed ID's or something. My tuner hates that I have Nismo's, to me the car runs perfect but he reakons he could get it a whole lot sweeter with some ID's etc in there

I would suggest going some more modern injectors. Go top Feed ID's or something. My tuner hates that I have Nismo's, to me the car runs perfect but he reakons he could get it a whole lot sweeter with some ID's etc in there

Bosch injectors no good? I thought they were the same as ID's, they are also top feed. No?

Bosch injectors no good? I thought they were the same as ID's, they are also top feed. No?

Yes they are the same thing - 89CAL was looking at your current list and missed your shopping list.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...