Jump to content
SAU Community

Recommended Posts

Hey all

Currently in the strip down stage of my track car.

Below are pics of the engine with turbo removed and carbon canister gone etc.

Is there anything else that isnt needed or can be tidied?

I cant see much more. But just after another set of eyes!

Plus while people are reading, wheres the cheapest and easiest place to get a 6boost gasket?

20140425_132209_zps2d8d83c9.jpg

Link to comment
https://www.sau.com.au/forums/topic/442282-stripping-unneeded-engine-items/
Share on other sites

I'd keep the charcoal canister, it's like 100grams and soaks up the fuel tank fumes and burns them while the engine is running, and has zero effect on hp.

Sound attenuation material is heavy, inside the cabin, removing trim and that sound junk will save you some weigh.

Ditch the bonnet catch assembly.

Use bonnet pins.

NO

could block off the line the goes from the rocker cover breather to the intake mani if running a breather on catch can, change hose on turbo water return line so no leaks and change heater hoses for any future leaks

Edited by Dan_J

Don't replace heater hoses.

Ditch the heater. Definitely no future leaks.

Dan J - why not ditch the bonnet catch. It will need 2 fastenings, pins will do the job nicely and remove surplus sheet metal that impedes airflow to the radiator. Less can be more, even if it means a bit more work.

Ben - agreed. This thread belongs in Motorsport Builds though.

Heater has also been removed already

Interior is stripped. Sound deadner has been removed. Most wiring has been removed.

Have a very light carbon bonnet.

Headlights gone. Looking for some sealed lights to use.

At the moment getting a list of mods together.

A 6boost manifold gasket?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Block bump. $400. As above cyl 6 needs bore or sleeve.
    • I would think making the argument that the travel is limited by a spring flexing against a spring perch as "the same method". Later on in the document they do state that the spring can't bind on full bump travel and cannot come loose in full rebound travel as well. (which is all very sensible). The laws are actually pretty sensible and reasonable. It's just that the people who enforce and check them don't actually read them or know them accurately. "Oh, coilovers? Instant fail mate. Don't even need to look at it." - Guy who will be instantly reported by me. There is probably merit to people who do get defected for height also get defected for the suspension in that state that allows it. I did never consider the people who are complaining about coilovers being picked on are also running around at 50mm off the floor.
    • I think given SAU's knowledge of E85 we can strongly conclude that 10% ethanol in almost any situation is entirely fine. Almost all of the myths against E85 were overblown, let alone E10.
    • From your link See bold text, is this referring to damper settings, if so that may a issue for "some" inspectors, I cannot see aftermarket coilovers having the evidence that "must be available that its functional performance is equivalent to the original" Maybe just remove the adjustment knows and hope for the best???? Meh 5.2 Suspension travel In all instances, modifications to a vehicle’s suspension must ensure the integrity of the system and not compromise the ride quality. At least two thirds of the original suspension travel should be maintained in both directions (rebound (i.e. extension) and bump (i.e. compression)), and rebound must be limited by the same method used by the vehicle manufacturer or if this is not practicable due to the nature of the modification, an equivalent method. If an alternative method is used, evidence must be available that its functional performance is equivalent to the original.
    • They actually don't - They adhere to VSB14 rules just like Victoria. The rules are against CABIN adjustable height, and it quite clearly states that the height has to be within parameters. I asked the VASS engineer to confirm this when I got my car engineered and they refused to engineer the coilovers because they didn't meet the requirements for requiring engineering. (mine are height adjustable.) People "Not wanting to bother" with "Actually reading/knowing/adhering to the rules" should result in fines and immediately losing the ability to issue blue slips and/or RWC's in Vic.
×
×
  • Create New...