Jump to content
SAU Community

Recommended Posts

FOR SALE: (mistake in title, engine comes with turbos, apologies)

(BNR33 GTR) RB26DETT

(Power steer pump, flywheel, HD clutch and yellow jacket coil packs, stock R33 GTR ECU are available also, not included in sale)

Complete RB26dett sump to covers all intake side with standard manifolds and dump pipes, has standard injectors, standard cams and turbo's.

Removed from R33 GTR (long nose crank drive) with 120,XXXkms, has had a rebuild 15,XXXkms ago with new genuine rings and ACL bearings, and also fitted at rebuild:

N1 oil pump

Nismo multiple layer head gasket
Tomei oil restricter

Water pump, timing belt and tensioners all replaced
Nur N1 covers
All new genuine nissan gaskets used

Head Reconditioned with new retainers

Polished Twin turbo pipes

$3500

Engine has been extensively run, compression tested exactly 170psi across every cylinder and leak down tested each cylinder with zero issues. Inspections are more than welcome, feel free to message me if you have any questions.

Located Gold Coast however can freight Auswide.
0414596256

Johnny

Edited by slidinr32gtr
Link to comment
https://www.sau.com.au/forums/topic/443106-r33-rb26-minus-turbos-for-sale/
Share on other sites

  • 3 weeks later...
  • 5 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
×
×
  • Create New...