Jump to content
SAU Community

Recommended Posts

Morning skyliners,

After some advice. I have an r32 gtr bought from Vic and looking to engineer it here in nsw.

I was asked to get an emmisions test as it is an r33 rb26.

With the nistune ecu and a 3.5in Zorst it was running 3x over the legal limit for emmisons (stock engine, factory injectors AFM 17psi boost)

I thought replacing the nistune with an r32 gtr stock ecu would run a factory tune. Emmisons was 10x over

Any one got any ideas. I am thinking put the nistune back in and get it dyno tuned back to a stock or more factory tune which will make it closer to the legal limits? Also getting a better cat.

Thanks in advance. I got a quote from a dyno tuner he said 3-4k including exhaust mods. Seems a bit exxy

you could lean on the tune a bit better and take the idle and cruise mixtures closer to 14.7...this will be easier to do with nistune and a good tuner....the stock ecu would do this on closed loop which can make it variable depending on how good your o2 sensors are.

3-4k is way over the top...... where are you located? happy to help. My tuner could re-adjust your cruise and idle mixtures on a road tune for $250.

You will need a factory cat too, I find with Nistune the closed loop is very lazy. I usually disable it completely and run it in open loop..

Easiest way to pass an emissions test, stock cat & E85

Run heat range 5 plugs and mix 5 litres of E85 with 20 litres of 98.

It will pass with flying colours.

DO NOT BOOST IT :)

you have no choice, they control your car you don't control it

I'd agree with above, just get it retuned, dial the boost way back, fix the afrs. But it is a good opportunity to do an e85 conversion.. :)

If your o2 sensors are shot, or the cat is aftermarket, or you have larger injectors, the stock ECU will be absolutely useless. Probably why you had the 10x emissions.

you have no choice, they control your car you don't control it

They don't boost it. I used the said method with a friends DE+T and it was said to be better than most econo cars with its result.

You really need a wide band to really know what's happening.

. not sure what functionality the trial version of nistune has.

Edit.

John beat me to it.

Apparently any consult cable should work,but Nistune can't guarantee it will.

Edited by Ben C34

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
    • Shock tower brace is in +5Kw....LOL  
×
×
  • Create New...