Jump to content
SAU Community

Braided Fuel Line

Adz2332

By Adz2332,
in Engines & Forced Induction

 Share

Recommended Posts

XRATED Veteran

XRATED

Posted
Posted

Before you just go out and buy the cheapest hose you can...

1. Do you really need braided hose?

2. What fuel are you using?

3. Does the hose you are planning to buy have good and well priced fittings compatibility.

At the end of the day you'll end up spending thousands on hose and fittings....

Cheers J.

  • Like 1
Neil Grand Master

Neil

Posted
Posted

I'd have to disagree Badgaz,,,I've seen heaps of cars running it and not one has exploded into flames. I think if it's done properly there will be no problems at all.

I've just converted my radical to that system(not steel outer braided though) and I feel a lot safer than using simple hose clamps.

Adz check out these guys,,,I buy all my hoses and fittings from them and they are cheaper than earls ect.

www.phenixindustries.com.au

Cheers

Neil.

GTSBoy Grand Master

GTSBoy

Posted
Posted

There have been extensive discussions on the various braided line options over at PF. I would recommend a search over there (use google to do the site search - like most forums in the inbuilt search sucks donkey dick). Mush solid info over there from the MANY people who use the stuff all the time.

Trex Grand Master

Trex

Posted
Posted

Am I the only one who has read heaps of threads and been told from people about pin holes in the cheap braid? It could be a case of, the people I heard it from are in bed with the well known brands. But, I'd prefer to be safe than sorry.

There are some really nice attachments for fuel braid, like the filter. But at the end of the day, it's a lot of money for something cheap that can go wrong.

XKLABA Grand Master

XKLABA

Posted
Posted

I upgraded my whole system to -8 speedflow 200 PTFE braided hose bypassing all the factory stuff, I figured it is carrying the only fluid in the car that can potentially burn the whole car to the ground so why on earth would you use cheap shit and risk losing the whole car just to save a few dollars, cheap eBay hoses leak and cheap eBay fitting don't seal properly when used with E85, its just not worth the risk

It really depends on your setup and wether the factory lines are big enough to flow what you need, if so the just replace the rubber hoses with E85 stuff and flush out the steel lines to get rid of any crap that's in them before the E85 cleans it into your fuel rail

I had to upgrade for my setup and due to putting a surge tank under the boot it made it easier to just new lines, as well as a 10micron screen filter and Ethanol sensor where easier to in stall as there are fittings to go straight onto them :)

  • Like 1
XRATED Veteran

XRATED

Posted
Posted

Its to run e85 on my track car.

my tuner suggested I do it.

also I cant really see or know how to find good stuff vs shit stuff.

Who sells it all that I can just grab it directly from tnem?

A reasonable middle of the road brand is aeroflow. They have everything you need for a good price for the quality. Just don't buy the e85 comparable pushlock hose.

Don't muck around with e85, buy Teflon lined hose or solid steel/alloy lines... everything else I've used just drys out and cracks...

My advice would be to not use stainless braid as it will chaife through anything it touches, including steel. There are other outer casings that are just as strong but don't chaife...

Good luck..

scotty nm35 Grand Master

scotty nm35

Posted
Posted

I wouldn't suggest alloy lines, unless they are anodised.

I have been running Torques UK teflon braided lines for years on my daily, without any issue. I had a lot of problems with the proflow teflon braided lines weeping from the fitting, ended up ditching them for the Torques gear, which is Aeroflow apparently.

Personally I would be running the stock fuel lines and changing the rubber hoses for modern ethanol safe hose. I have seen 450 odd kw on ethanol through the factory GTT/gtst fuel systems, only the fuel filter ever seems to be an issue.

XKLABA Grand Master

XKLABA

Posted
Posted

Weldon do a 6 micron fibreglass E85 safe filter, I have a 10 micron Speedflow steel screen filter in my system, the problem with most filters is the "glue" that holds the element to the housing gets melted from the ethanol, I did find a few that would be ok before I decided to just get the Speedflow one

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      NC MX5

      By The Bogan · Posted

      Yeah, it's getting like that, my daughter is coming over on Thursday to help me remove the bonnet so I can install the Carbuilders underbonnet stuff,  I might get her to give me a hand and remove the hardtop, maybe, because on really hot days the detachable hardtop helps the aircon keep the interior cool, the heat just punches straight through to rag top I also don't have enough hair for the "wind in the hair" experience, so there is that....LOL
    • joshuaho96
      Cas issue

      By joshuaho96 · Posted

      Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • joshuaho96
      Jacks that fit under GTR lips that can reach the subframe?

      By joshuaho96 · Posted

      On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Duncan
      Mistakes were made, my R34 Story

      By Duncan · Posted

      Nice....looking forward to that update
×
×
  • Create New...