Jump to content
SAU Community

Braided Fuel Line

Adz2332

By Adz2332,
in Engines & Forced Induction

 Share

Recommended Posts

XRATED Veteran

XRATED

Posted
Posted

Before you just go out and buy the cheapest hose you can...

1. Do you really need braided hose?

2. What fuel are you using?

3. Does the hose you are planning to buy have good and well priced fittings compatibility.

At the end of the day you'll end up spending thousands on hose and fittings....

Cheers J.

  • Like 1
Neil Grand Master

Neil

Posted
Posted

I'd have to disagree Badgaz,,,I've seen heaps of cars running it and not one has exploded into flames. I think if it's done properly there will be no problems at all.

I've just converted my radical to that system(not steel outer braided though) and I feel a lot safer than using simple hose clamps.

Adz check out these guys,,,I buy all my hoses and fittings from them and they are cheaper than earls ect.

www.phenixindustries.com.au

Cheers

Neil.

GTSBoy Grand Master

GTSBoy

Posted
Posted

There have been extensive discussions on the various braided line options over at PF. I would recommend a search over there (use google to do the site search - like most forums in the inbuilt search sucks donkey dick). Mush solid info over there from the MANY people who use the stuff all the time.

Trex Grand Master

Trex

Posted
Posted

Am I the only one who has read heaps of threads and been told from people about pin holes in the cheap braid? It could be a case of, the people I heard it from are in bed with the well known brands. But, I'd prefer to be safe than sorry.

There are some really nice attachments for fuel braid, like the filter. But at the end of the day, it's a lot of money for something cheap that can go wrong.

XKLABA Grand Master

XKLABA

Posted
Posted

I upgraded my whole system to -8 speedflow 200 PTFE braided hose bypassing all the factory stuff, I figured it is carrying the only fluid in the car that can potentially burn the whole car to the ground so why on earth would you use cheap shit and risk losing the whole car just to save a few dollars, cheap eBay hoses leak and cheap eBay fitting don't seal properly when used with E85, its just not worth the risk

It really depends on your setup and wether the factory lines are big enough to flow what you need, if so the just replace the rubber hoses with E85 stuff and flush out the steel lines to get rid of any crap that's in them before the E85 cleans it into your fuel rail

I had to upgrade for my setup and due to putting a surge tank under the boot it made it easier to just new lines, as well as a 10micron screen filter and Ethanol sensor where easier to in stall as there are fittings to go straight onto them :)

  • Like 1
XRATED Veteran

XRATED

Posted
Posted

Its to run e85 on my track car.

my tuner suggested I do it.

also I cant really see or know how to find good stuff vs shit stuff.

Who sells it all that I can just grab it directly from tnem?

A reasonable middle of the road brand is aeroflow. They have everything you need for a good price for the quality. Just don't buy the e85 comparable pushlock hose.

Don't muck around with e85, buy Teflon lined hose or solid steel/alloy lines... everything else I've used just drys out and cracks...

My advice would be to not use stainless braid as it will chaife through anything it touches, including steel. There are other outer casings that are just as strong but don't chaife...

Good luck..

scotty nm35 Grand Master

scotty nm35

Posted
Posted

I wouldn't suggest alloy lines, unless they are anodised.

I have been running Torques UK teflon braided lines for years on my daily, without any issue. I had a lot of problems with the proflow teflon braided lines weeping from the fitting, ended up ditching them for the Torques gear, which is Aeroflow apparently.

Personally I would be running the stock fuel lines and changing the rubber hoses for modern ethanol safe hose. I have seen 450 odd kw on ethanol through the factory GTT/gtst fuel systems, only the fuel filter ever seems to be an issue.

XKLABA Grand Master

XKLABA

Posted
Posted

Weldon do a 6 micron fibreglass E85 safe filter, I have a 10 micron Speedflow steel screen filter in my system, the problem with most filters is the "glue" that holds the element to the housing gets melted from the ethanol, I did find a few that would be ok before I decided to just get the Speedflow one

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      NC MX5

      By The Bogan · Posted

      The final part arrived today to un-clampify and simplify the intake Who would have though a 1/2" hose stainless bulkhead fitting designed for below waterline bilge pumps would be what I needed Test fit on a 3" offcut I had laying around to see if it would work, and it worked a treat All going well the intake will be on its "final version" tomorrow 
    • Komdotkom
      R32 Gtst - Track Car

      By Komdotkom · Posted

      Good luck on the weekend mate
    • Duncan
      From Japan and back to Europe, my sh*tbox R34 GTT

      By Duncan · Posted

      Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Duncan
      New

      By Duncan · Posted

      Welcome to SAU, what are you looking at buying?
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
×
×
  • Create New...