Jump to content
SAU Community

Recommended Posts

So I've noticed on eBay there's a few greddy 6 throttle body's intake plenum replicas on ebay, now the greddy is around the $1100 mark and the eBay jobs are around $300 to $500 but still boast of decent power gains. Has anyone brought a eBay special and noticed the gains with there rb26? Or had any troubles with them?Or is it best to stay with the original intake?

Link to comment
https://www.sau.com.au/forums/topic/444211-ebay-plenum-for-rb26/
Share on other sites

Who's to say the Ebay one won't also?

Have you checked this theory by measuring the egt's in each runner, or are you just happy to quote old wives tales? Gibson didn't have any trouble with it afaik...

I'm just asking questions to find out if it's worth while or not. I'm no mechanic and trying to find these things out on google is hard if not to no answer at all. That's why I've tyres to the forum to hopefully find someone that has done this and that may help me out

People do all kinds of stupid things, that doesn't mean you should copy them... :P

I have seen 500kw through a factory setup, intercooler, plenum, manifolds, piping, airbox, fuel lines etc. If you are near that I would be more worried about the block splitting than the runner flow. Just run a fat mixture and cram some more boost in.

Just to help the OP, ive got a genuine Greddy and had a ebay/china copy side by side.

You had to look really hard to spot the differences, runners, diameters, everything identical, slight differences in casting lines...very slight.

Would come down to the quality of the alloy IMHO.

Ive met and spoken with a Chinese manufacturer that makes them, as he said to me with any part, supply me with the brand name original and ill copy it for a fraction of the price and you wont tell the difference.

And just to throw a spanner into the works, he was offering them to me for $US 80 dollars each 2-3 years ago, no wonder there are so many copies out there......

Would come down to the quality of the alloy IMHO.

This... And how it's actually made. You can have the same materials, same design (making a mould isn't hard) and still stuff it up by having the casting temperatures or cooling speed all wrong. End up with a brittle part of the product which will be the first to crack under a high load.

Personally, I wouldn't want anything potentially breaking off a scraggy bit of metal under high temp / pressure and going straight into my engine. So if you go for a cheap copy get it checked out with a scope and cleaned up before it goes near the car.

  • Like 1

I found a few forums searches off google saying that they lean number 6 , thought I'd ask before I finished my motor because it would be easier to change a manifold whilst it's out. I'm thinking I might buy the greddy/trust manifold for peice of mind

Re cylinder 6 - true. Although tuned around.

Stock plenum is awesome and you will have no issues so keep it. Don't waste your money on these for the RB26

In my opinion the best is the Nismo Plenum - max 2-4% improvement - EDITED: 1-2% power and 0.4% fuel saving - SUBJECTIVE. Yes I have one

At $1500-$2000 money is spent better elsewhere.

Topic covered heaps already

Edited by Sinista32
  • Like 1

I'm building my motor ATM to have around 450 to 500kw

I found a few forums searches off google saying that they lean number 6 , thought I'd ask before I finished my motor because it would be easier to change a manifold whilst it's out. I'm thinking I might buy the greddy/trust manifold for peice of mind

I see.

Well I'd double check with Racepace, just give them a call to confirm.

As I have said before, you can get decent power gains with the stock Inlet Plenum but how much to what point, I'd double check.

So yeah, don't go throwing your money on ebay parts.

I noticed your user name and that you had a R32 GTR, so im assuming your doing a RB30 bottom end?

If so, before you go any further, the Greddy plenum will hit your clutch master, there are work arounds, or a few ways to do it but if your only going to 500Kw you may as well stay with the factory item, it does still work well.

Yes 6 can lean out, or run leaner, quick cheap way is get your injectors flow tested and put the highest flowing one on number 6. ;)

Otherwise 6 EGT probes on the manifold will do the trick......as will getting the tuner to run injector 6 a little longer.

Edited by GTRPSI
  • Like 1

Yeah mate I'm halfway through building a 26/30. Can the stock manifold be port match to the head or is it already done from factory? Also is there threads on how to fix the greddy manifold with the clutch master cylinder touching?

There are a few threads, all with different suggestions/methods in the RB30 section.

From using spacers under the cross member to steering shaft spacers to cutting the bonnet, some even remove the clutch booster and use a different clutch slave with spacer.

We are doing the same build right now for our 26/30 R32 GTR.

Edit, Forgot to add, port matching always helps, all depends on how far you are going or are prepared to look at details.

Edited by GTRPSI
  • Like 1

I've had the 30 bottom end in my GTR before but I never went crazy on the head. My n1 pump let go so I'm spending abit more this time. But all I did was cut the inner braces out of the bonnet and tapped the floor up abit with a hammer near the low mount dumps for clearance. Everything else was sweet. Well I've got an aluminium die grinder bit so I better port match it

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...