Jump to content
SAU Community

Rb25 Blow Off Valves And Waste Gates.

shizz

By shizz,
in Engines & Forced Induction

 Share

Recommended Posts

shizz Apprentice

shizz

Posted
Posted (edited)

helloooo,

here is another debatable topic and a question thats has more than likely been asked before, I have a 1993 S1 R33 GTS that i have fitted the stock turbo kit from the GTS-T, the car has been fine for the last 6 months no issues, But now i wanna up the boost from the stock 5psi to around 10psi nothing crazy. My question is, the stock system runs a BOV and a internal waste together, now i have only been running the internal waste gate but i have just ordered a Greddy BOV and want to know if i can just run the BOV and not the waste gate (still leaving the actuator on there waste gate just not running the vacuum hose to it). going off what i understand it should be fine but is there anything im missing ????

Edited by shizz
shizz Apprentice

shizz

Posted
  • Author
Posted

BOV are used so when you change gear you dont back up your turbo and essentially keep it spooled when shifing, so why run a internal gate as well or is the gate just a fail safe so if the bov dosnt work you wont over boost your car?

GTSBoy Grand Master

GTSBoy

Posted
Posted

BOV are used so when you change gear you dont back up your turbo and essentially keep it spooled when shifing, so why run a internal gate as well or is the gate just a fail safe so if the bov dosnt work you wont over boost your car?

Please, please, please, follow the advice about googling how/why a wastegate does what it does.

BOV and wastegate bear no relationship to each other except that you will find them both on a turbo car.

shizz Apprentice

shizz

Posted
  • Author
Posted

so i come here to ask a question because im unsure and know one has told me so how am i ment to know and i get told to google and look at different forums. it might be a retarded question if u know how stuff work but some people dont and thats why they come her but yet you ask a question and people just laugh at you for sounding like a dick.

Ben C34 Grand Master

Ben C34

Posted
Posted

so i come here to ask a question because im unsure and know one has told me so how am i ment to know and i get told to google and look at different forums. it might be a retarded question if u know how stuff work but some people dont and thats why they come her but yet you ask a question and people just laugh at you for sounding like a dick.

Yes.

Piggaz Grand Master

Piggaz

Posted
Posted

spend money on a proper diff...

Then again, 10 years ago I would have invested in a BOV (I actually did on my 1st car) - dumbest thing I ever did...

Don't talk sense. No one will listen with the BOV debate.

niZmO_Man Grand Master

niZmO_Man

Posted
Posted

so i come here to ask a question because im unsure and know one has told me so how am i ment to know and i get told to google and look at different forums. it might be a retarded question if u know how stuff work but some people dont and thats why they come her but yet you ask a question and people just laugh at you for sounding like a dick.

1. Learn how to construct sentences properly. It will help you in life.

2. You don't have basic understanding of how a turbocharged engine's components work together. This means you'll have to research them yourself in your time. No one here will school you in that, so have fun Googling.

3. Sell your after market blow-off valve and spend the money elsewhere (e.g. better tyres).

4. Look in the DIY section for grounding the standard boost solenoid.

OR, ignore everything I said and do whatever you want, because it's your money and your car.

  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • RP1421
      S15 Spec R

      By RP1421 · Posted

      A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Murray_Calavera
      WTAC 2025

      By Murray_Calavera · Posted

      Yeah mate, never miss it.
    • Ozdavroz
      WTAC 2025

      By Ozdavroz · Posted

      Any going to watch World Time Attack at SMSP this year?
    • Jarsky
      R33 Fuel Pump & Brakes after alarm swap

      By Jarsky · Posted

      Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
    • zillah
      Recommendation for engine oil funnel spill free

      By zillah · Posted

      hahaha good on
×
×
  • Create New...