Jump to content
SAU Community

Recommended Posts

and gts-boy when i went into Vicroads and asked to update the engine number i didn't "tell them it came out in that chassis"

i asked can my records be updated with the 26 that i put in it as i couldn't find a decent 25 and they said that is fine :cheers:

Smart comeback.

It's all a bit moot in the context of the OP's RB26 anyway, seeing as it is "fully built engine making 490rwkw" - meaning that it won't even be close to legal in Victoria anyway, engineering required or not. Especially if not.

As Ben said, "Boost off into the sunset . Suckers!"

You guys seem really keen to avoid getting your cars "engineered". How much does it cost? My car is non standard in at least 10 significant ways but "low volume certification" done by an approved engineer cost me $550 which is pretty standard (it does vary a bit but not much).

I fairly sure all the " authorities " would have is Nissan as the make, R34 Skyline as the model and GT/GT-t/GTR as the variants, they most certainly wouldn't have all the chassis differences listed nor care about them, as far as they are concerned they are the same chassis and that is what matters, its not about cheating them and not some big conspiracy

IIRC in NSW you are allowed to go either 15 or 20% bigger in capacity providing the engine is from the same family, ie RB for RB and SR for SR etc

All I was objecting to was the idea of telling them "It came out in this chassis" which is an outright lie. I don't care what the f**k else you clowns think you can get away with.

now you've resorted to petty name calling, which obviously means your argument isn't valid and that what we have been trying to explain to the original poster, is that what he wants to do is perfectly fine in the eyes of the people who actually matter

Which is true but he is arguing a point he doesn't know 100%, now the OP has gone to his local governing body and asked the question to someone that works there and got his response and for all GTSboy knows the guy that works they know his job and gave the correct answer, so who does OP believe, the person that works at Vic Roads and someone on a forum from a different state

As for his argument its a different chassis, its concidered an R chassis, and to the best of my knowledge there isn't an R chassis 1, an R chassis 2 or an R chassis 3, they are all considered an R chassis and the differences in the build codes are to dictate what that R chassis got like a 2.5 or 2.6, 2WD or 4WD etc, but still all the same chassis code no matter what little differences there actually are

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...