Jump to content
SAU Community

Recommended Posts

Hey all I previously had a relatively stock r33 which I no longer have and have bought a new one, this one has had a lot of work done on it or so I was told!

Some of the things I know it has is:

Cheapish looking ffp

Upgraded injectors (don't know what they are)

Says spitfire on the front of engine so assuming?

Upgraded turbo ball bearing maybe hi flowed? Makes some noise when the cars turned off? Shaft play??

Was told there was about 15 grand done to the engine but no list of what had been done -.-

Hks pod

80mm TB

Fmic

Blitz? Bov.

And heaps more!

Was told it's near 400hp.. Rather infuriating

Does anyone know how to tell without receipts what's been done? Also I want to make the pod a bit quieter does anyone have any suggestions custom boxes? Idk!

If anyone can help me with suggestions to clean up the engine bay would be great

post-135357-0-08680100-1406957355_thumb.jpg

I'm not real sure how you expect us to know what has been done to the engine internally? Only way to find out now is to strip it and seen as you haven't indicated that there are any problems I'd say you eons be keen on that

Ask the person you bought it off, which is probably what you should have done in the first place. If I was buying a car and someone said they spent $15,000 on the engine, my first question would be "what's been done to it?"

If you look carefully you can see it actually says 'splitfire' not 'spitfire'.

A noticeable thing straight away is that they have replaced coilpack cover with the gayest thing I have seen in a long time.

It was from a car dealership but I'm not to sure about that scribble.

I tried finding out what had been done.. I got a mod list with the most basic of shjt after I got the car just the shit that's obvious and then he just said what's been done..

Coil pack cover? err.

Nah not to keen on stripping it but maybe..

unless you can find out who the tuner was your just going to have to look for your self, or take it to someone who knows a lot about 33's and have them inspect it..

By the looks of the 'wrecker writing' I'd say he blew the engine and replaced it with one to sell. so nobody will know about internals.

Good luck =)

Maaaaaaaaaate

You could ask a friend who knows what they are looking at to give you an idea on the visuals.

then Take it to your tuner. Get them to tell you what has/hasn't been done and then put it on the rollers

Learn from the experience. Once bitten twice shy

Some people and especially dealers are looking for the uninitiated/unwary.

Good luck

If you look carefully you can see it actually says 'splitfire' not 'spitfire'.

A noticeable thing straight away is that they have replaced coilpack cover with the gayest thing I have seen in a long time.

He's pretty much an expert. Seen alot of gay things in his time. His search history will confirm ;)

Well seeing as the car is yours now, I strongly reccomend getting on a dyno and checking out how it runs. Power , air fuel ratio , timing etc

The last thing you want is to kill an engine due to an unknown tune.

Which I'm going to say is very likely in this case.

Edited by Ben C34

Yeah oils and everything are sweet. They said it had a new turbo put on but I think they're full of shit cos it's noisy as f**k.

And yeah I'll have to go find somewhere (brisbane) to get it checked out. Has a haltech platinum in it. And yeah they're does seem to be a few stupid mods on it.. Been fixing slowly. But to fix something that isn't broken means spending more money haha :P

And it's even worse not knowing where to start! Haha

Hopefully it isn't just some shit engine in there hooked up to 14.7psi :O

Hahah yeah hopefully! Took it to a mechanic when got roady and had some shit done. All they managed to do was make the car run like shit cos they f**ked my throttle body and now it idles too high and put my tune out of wack and then replaced my bov which I then had to replace again -.-

There looks like alot of ebay on there...

Maybe check the fpr is genuine, of not, ditch it and get a better one. Why would you buy a dar if you dont know whats been done to it?

the pedal was sticking and so they cut the screw or some sit and moved the throttle body too high? And yeah they had the stock on there non plumbed and it was ducked haha

Fpr? I'm planning on "defaggotizing" this. And I was originally getting a different one.. I sent someone to pick it up and they came back with this one.. What a tard

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...