Jump to content
SAU Community

Recommended Posts

highflow sounds like the go. Only thing is i need quick turn around as its a daily for my mrs with no other car so will have to get another turbo and send it off seems from the site about $900. Pretty reasonable and those graphs seem to be spot on for street use.

Link to comment
https://www.sau.com.au/forums/topic/446752-r33-s2/page/4/#findComment-7398820
Share on other sites

highflow sounds like the go. Only thing is i need quick turn around as its a daily for my mrs with no other car so will have to get another turbo and send it off seems from the site about $900. Pretty reasonable and those graphs seem to be spot on for street use.

Are you sure your missus wants that kind of power? Even 250 would be a handful in the wet...

Link to comment
https://www.sau.com.au/forums/topic/446752-r33-s2/page/4/#findComment-7398934
Share on other sites

Are you sure your missus wants that kind of power? Even 250 would be a handful in the wet...

Was going lower boost in winter or even when she drives it. In saying that she has pretty good control with the foot and is actually very good at getting the car up and going. Not one to just flatten it actually feels what the car is doing. She drove my manual LS1 before and that was a pig to drive. I do understand turbo is a different car but to be honest i have more chance of coming unstuck than she does.

Pretty sure on the avcr you can actually turn boost down in certain gears.

I pretty much only drive it after i do something to it or someone else does.

Link to comment
https://www.sau.com.au/forums/topic/446752-r33-s2/page/4/#findComment-7399038
Share on other sites

Nismo GT diffs are great for daily driven cars.. they allow you to adjust the torque when it engages too.

I personally now run a 2 way KAAZ however the car is a street/track car and not daily driven.

Link to comment
https://www.sau.com.au/forums/topic/446752-r33-s2/page/4/#findComment-7399153
Share on other sites

A real diff. Quaife or other helical/torsen centre. Nismo or other brand 1, 1.5 or 2 way mechanical, depending on how street/track the car is intended to be.

After doing a lot of reading a lot of people are saying shimming the diff is fine. The LSD in it is pretty tight and predictable from the very little driving i have dont of it..

What is everyones opinions on shimming?

Seeing as its purely a daily driven car.

Also going to leave it at the power it has now and get a track car it looks like. Mrs suggestion not mine. She must of had a good day...

Link to comment
https://www.sau.com.au/forums/topic/446752-r33-s2/page/4/#findComment-7399751
Share on other sites

id say drive the car first and see how the diff is behaving. also in relation to your driving style and power levels you are achieving.

An R33 VLSD in good condition isn't a bad bit of kit and if it working fine then I don't see the point in throwing money at a diff. There are always plenty of places to throw money at a skyline. Id throw money at good tyres and suspension before changing out a diff that was performing ok.

Link to comment
https://www.sau.com.au/forums/topic/446752-r33-s2/page/4/#findComment-7401364
Share on other sites

id say drive the car first and see how the diff is behaving. also in relation to your driving style and power levels you are achieving.

An R33 VLSD in good condition isn't a bad bit of kit and if it working fine then I don't see the point in throwing money at a diff. There are always plenty of places to throw money at a skyline. Id throw money at good tyres and suspension before changing out a diff that was performing ok.

If there was an unlike button I would unlike this. A VLSD is only useful in an NA Pulsar.

Link to comment
https://www.sau.com.au/forums/topic/446752-r33-s2/page/4/#findComment-7401394
Share on other sites

hey, don't get me wrong. I love a better diff. Ill have a better diff. But when there is usually always something to have money spent on in a skyline then jumping at this one unnecessarily its just not something id recommend. If he was going to be tracking a lot, then yeah for sure do it.

As is said, id go for tyres n suspension upgrades before a diff if the stocker is working ok.

Link to comment
https://www.sau.com.au/forums/topic/446752-r33-s2/page/4/#findComment-7402191
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
    • Hi All, putting the engine back together and everything is perfect except have this plug left over.. any ideas what it is for and where it goes? Is on cold side under the intake plenum *note not a stock plug, as everything has been modified Cheers
×
×
  • Create New...