Jump to content
SAU Community

Recommended Posts

Hey guys, just recently bought myself a new set of TE37SL Black Editions in 18 x 9.5 + 22 and was wondering what tyres would fit well on my R34 GT-T. I plan on rolling the guards and most probably removing the inner lining @ the front to reduce chance of scrubbing. Any advice would be much appreciated!

Link to comment
https://www.sau.com.au/forums/topic/447132-tyre-size-for-te37sls/
Share on other sites

+29 / +30 offest is ideal for the R34GTT. (in my opinion)

However 7or8mm wont make a difference in your case - A 265 /35/R18 will be fine and the tyre will sit flush with the guard.

on a +29 a 255 sits flush with the rim and guard.

Edit: Sounds like you bought GTR fitment.

8.5" on the front for the GTT

Edited by Sinista32
  • Like 1

I spoke to the owner of this R34 a while ago and understand they are running the same spec wheels I have all round, with rolled guards and removed inner splash guard on the front but I didn't manage to catch the Tyre size :(

post-135456-0-55942300-1408834205_thumb.png

Edited by Patski

235/40r18 would be the go, very common size so you'll have many more choices with better prices

plus, as above, 235/35 on a 9.5" rim is a fair stretch

You can check out examples on this website http://www.tyrestretch.com/

Or maybe a 245/35, I see that size every now and again, a friend of mine runs 245/35 on 9" wheels and it sits pretty flat.

  • Like 1

235s are illegal on 9.5 rims. Why on earth would you buy wide wheels and put narrow tyres on? Why don't you think about tyres BEFORE you buy the wheels?

Tyres were taken into consideration before the wheels were purchased. I have been getting different suggestions from various people, all of which mind you, have been very similar. Thought I'd take a punt on here for valid opinions. Didn't think it would make people so mad. Edited by Patski

You can usually look up what the rim size range is acceptable for the tyre manufacturer. EG:

http://www.yokohamatire.com/tires_101/customizing/rim_wheel_width/

The reason people get mad is that Skylines are supposedly about good engineering. Putting a fitment set of tyres/rims on them is seen to be the same as neons.

You can usually look up what the rim size range is acceptable for the tyre manufacturer. EG:

http://www.yokohamatire.com/tires_101/customizing/rim_wheel_width/

The reason people get mad is that Skylines are supposedly about good engineering. Putting a fitment set of tyres/rims on them is seen to be the same as neons.

I'm not racing my Skyline, I should have cleared that up in my OP. Regardless, I'm not trying to stick these wheels on their car. Thank you for the link though mate, I'll check it out.

I'm not racing my Skyline, I should have cleared that up in my OP. Regardless, I'm not trying to stick these wheels on their car. Thank you for the link though mate, I'll check it out.

Lol

You don't have to be racing a car to have a reason to put correct size rims/tyres on a car. You just need to want to not turn a car that handles very well into one that doesn't. (and potentially get a defect in the process)

18x9.5 +22 all round is considered a GTR size but post up your results as it'll be interesting to see how it turns out.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • KW only offers a set for the R32 GTR. Popular options are D2 racing, Ksport or Öhlins. I have a D2 Racing coilover set, though I don't know for sure which one.
    • Well, the good news is you have more than one very good option for new coilovers in and around your country. Worth the drive over to KW to talk about GTR stuff.
    • Fair enough, I am in no way a tire expert so I'm not familiar with all the terms and conditions. I'll definitely note down the AD09 to potentially try in the future. Rain is not too big of a concern for now as I will probably only drive in the rain when I have to. And considering I still lack experience driving the GTR I'd more than likely take it easy too. I have coilovers in the car but as I barely got to drive so far I never bothered to even check if they are adjustable haha. The suspension is almost entirely old and worn as well so I suppose when I eventually fix that in the future that would make a huge difference.
    • There's not a great deal to report here .... except ...... FOR .... LSD!!!  I bought a Quaife LSD from the UK and shipped it here .... Wish I'd just bought locally cause the shipping and duty was $700! But there were so many diffs used in the E90s I just wanted to be absolutely certain I was getting the right one so I spoke with a supplier in the UK who builds race cars and they have heaps of experience with the E90s.  I pulled the diff out which was seriously awesome - I've never done anything like that before, I must have watched 1000 videos on YT about it as well as consulting the Bentley manual. It was super easy in the end. The diff was delivered to the awesome folks at Hornsby Diffs and will be back in a few weeks. I also replaced the diff bushings with some Nolathane ones.  Really looking forward to getting it back and getting back to the track or even the skidpan.
    • yeah... the 13kg/mm springs weren't always in there, I had 10kg/mm but doing a few SMSP commanded heavier front springs. It's so good now going into T1 and T2, just need more seat time and real tyres.
×
×
  • Create New...