Jump to content
SAU Community

Recommended Posts

Hi everyone.

Just thought I would share my experience with you all.

I recently insured my r34 gtr v-spec with Shannons at a premium of $2250 ($500 excess). I was told by a guy at work about nrma vintage. Catch is you have to only do no more then 9000kms per year and your car 15 years or over and obviously a clear driving history for the last 2 years. All no problem for me.

Anyway nrma premium came in at only $975.55 (300 excess.). A saving of more then $1200. And agreed value was no problem.

  • Like 6
Link to comment
https://www.sau.com.au/forums/topic/447336-nrma-vintage-and-classic-insurance/
Share on other sites

1800646605 is the direct number to NRMA's Classic, Vintage and Veteran.
Good post above!
Big savings can be had if...
* your car is at least 15 yrs old
* it's not your daily
* well secured
* travels less than 9000km/yr
* high sum insured may need to be supported with pics

The direct number above is advised over the usual NRMA Insurance arm (number).

  • Like 5

Changed from Shannon's to NRMA today.

Half the price of Shannon's !!!!!!!!!! only catch is you can't pay monthly, has to be an up front annual payment.

And YES, mods are allowed in the policy no problem whatsoever.

  • Like 2

HAHAHAHAHAHA

Just called NRMA

Quote came back @ $509

Shannons charge me $2200 a year

that is literally laughable

What model? Insured value? Age?

That's a bargain. I thought I was doing good at $975 compaired from Shannons $2200.

I'd say Shannon's arguing to lose a fair chunk of clients once word gets out.

It there own fault for being greedy. A little competition is good for us.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The final part arrived today to un-clampify and simplify the intake Who would have though a 1/2" hose stainless bulkhead fitting designed for below waterline bilge pumps would be what I needed Test fit on a 3" offcut I had laying around to see if it would work, and it worked a treat All going well the intake will be on its "final version" tomorrow 
    • Good luck on the weekend mate
    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
×
×
  • Create New...