Jump to content
SAU Community

Recommended Posts

A whole block of them from SAU will look superb > draw a crowd > probably elicit discussions over mods with bonnets up too...

Terry-32_zpseda1fb98.jpg

They won't be just 'pretty'.

Maybe a few enquirers will take away Membership Application Forms like 2013.

  • Like 1

I'm tempted to enter the LOLvo, but it still has that big ugly scratch in the bonnet and I can't be bothered having it repainted and/or covered. Otherwise the car is reasonably presentable - far from perfect, but not horrible either.

  • Like 1

Hmm, their Facebook page states the following for approval dates:

FIRST ROUND APPROVALS: Monday 15th September
SECOND ROUND APPROVALS: Tuesday 30th September
FINAL ROUND APPROVALS: Monday 13th October

So you might hear something today; or otherwise you'll have to wait until the 13th to get final word.

The Nur will get in, the rest of us wont because we're not part of the stance crowd or showroom condition.

Remember its not what you have its who you know, least thats the impression ive been getting over the past 12 months

Can we throw up some pics of the cars that have been accepted / approved then? Also helps so that we can recognise the cars as SAU on the day :)

6343959900_360fc11881_b.jpg

Eric (Pezhead)'s R33 GT-R:

9645575520_2522a83ab6_b.jpg

Dave (Aggroman)'s R34 GT-t:

5491547674_04fa5fe0cb_b.jpg




  • Similar Content

  • Latest Posts

    • Is it alright to top up with just another green coolant?
    • thanks GTSboy. My confusion at the moment is i am trying to locate the ignition, ECU battery power and the ECU negative The closest thing i can find is the for the S15 on Page 8 of the Wiring Specialties web page https://drive.google.com/file/d/0B9F33_M_GgENQnZ6STMxVmVNd1E/view?resourcekey=0-eZ4nNRwRoqa1qvKlWWHm8A I cannot find the same diagram for the R33 RB25DET Series 2 dash plug pin out.... Do you know what the Pins? or know where i can find the same pinout diagram for the RB dash plug? Thanks for the advice on the box... i like a 6 speed so might be on the lookout or the box now.. a topic of discussion for another post...
    • Will have a look at that. I cant see any leaks 
    • Put another overflow bottle (ie, a 1.25 coke bottle or similar) under the overflow hose and see if it is being pushed out there or if it is disappearing into the engine.
    • Staring on a stand is no issue. You just have to wire everything up, give it fuel and cross your fingers that the stand is robust enough. Arranging the inlet plumbing is often the hardest part, without any surrounding structure to hand some of it from. No need for coolant if you only want to run it for <1 minute. As to the gearbox - I think the little Aisin box is a bit stronger than the other small Nissan boxes that went behind SRs, but I wouldn't be too keen to test its limits with the torque of a boosted 25. I don't know if you can retain the box and the tailshaft. The box won't connect to the RB without an adapter of some sort, which is either a plate that will push the engine forward (which is not good for fitting it into the bay's available space) or push the box back, which messes with the box position and tailshaft length - OR - cut and shut work on the bellhousing, which is a long way from "least modification". I'd be buying a new 370Z 6 speed or similar, doing what has to be done to that to make it fit RB (ie, cut and shut bellhousing) and the requisite tailshaft custom/mods.
×
×
  • Create New...