Jump to content
SAU Community

Newbie R32 Gtr Engine Upgrades Etc

SSM

By SSM,
in Forced Induction Performance

 Share

Recommended Posts

XKLABA Grand Master

XKLABA

Posted
Posted

Yes, that is my plan as well.

The stock motor will be slower then the one I had. That was a 236kw/350nm NA engine.

Do the fit and tune at 15psi with exhaust and cam gears and the stock 26 should make about 250rwkw and 500+nm which will easy shit on what ever NA you pulled out

Link to comment
Share on other sites
fatz Grand Master

fatz

Posted
Posted

Sweet.

Can someone school me on the Kinugawa turbos? They have three kits on Ebay that I fancy.

Tanked to local turbo man, he claimed 500+ from stock turbos with steel turbine.

your local turbo man is full o shit

and yea a tunes stock motor will wipe the floor with a na

Link to comment
Share on other sites
SSM Enthusiast

SSM

Posted
  • Author
Posted

your local turbo man is full o shit

and yea a tunes stock motor will wipe the floor with a na

He also questioned why I bothered putting the old worn out and unreliable RB engine in a BMW instead of a M3 og M5 engine. He had used insane amount on his engine and it was never any good.

My plan is to make it reliable. A rebuild now, proper oil system, poper oil ventilation, good turbos and there will be some years before she needs to be taken care of again I hope. Not going to run insane hp anyway.

Link to comment
Share on other sites
SSM Enthusiast

SSM

Posted
  • Author
Posted

Go iD/ BOSCH 725 or 1000's. Much Nicer than those old wreck sard 600's

By elbows I'm assuming you mean dumps? A set of R34 GTR dumps will do.

A bit overkill with so big injectors or? Better safe than sorry though.

Link to comment
Share on other sites
SSM Enthusiast

SSM

Posted
  • Author
Posted

Cheers

Did get the engine yesterday, so I have been wrenching a bit today. Tested in the car and removed the oilpan to get the diffhousing cut off.

If the result is that I just can't get room for the twins, what will be the most responsive single turbo option?

DSC_0504.jpg

Link to comment
Share on other sites
Stixbnr32 Rising Star

Stixbnr32

Posted
Posted

Ditch the n1 oil pump no matter what gears are in it.

Go Tomei/HKS/Jun every time - in that order.

Get a trust sump extension - they wing the sump so its out to the left/right.

-5's will be fine with a good set of CAMs/Gears.

I had this with standard internals - 345KW at all 4's no issues until i dropped a big end bearing due to oil pump failure.

Link to comment
Share on other sites
SSM Enthusiast

SSM

Posted
  • Author
Posted

ah you steering wheel is on the wrong side

in that case you will get 500hp out of a stock motor

American hp is different to Australian hp

our horses are 20% smaller

Nope, you are talking Norwegian Viking horses

  • Like 1
Link to comment
Share on other sites
  • 2 weeks later...
SSM Enthusiast

SSM

Posted
  • Author
Posted

Ditch the n1 oil pump no matter what gears are in it.

Go Tomei/HKS/Jun every time - in that order.

Get a trust sump extension - they wing the sump so its out to the left/right.

-5's will be fine with a good set of CAMs/Gears.

I had this with standard internals - 345KW at all 4's no issues until i dropped a big end bearing due to oil pump failure.

Tomei is best and JUN is not that good? Have a JUN pump on hand now.

Link to comment
Share on other sites
GTRPSI Mentor

GTRPSI

Posted
Posted

Tomie pump is externally pressure adjustable, this is the reason i only like to run them, they are only a little bit more in price to the other brand name full pumps.

There is a plug on one side, on the outside that can be removed and you can adjust the oil pressure as needed.

Other pumps have it hanging on the inside of the sump, if you want to play with it you need to get the sump off which in most cases is a engine out job.

I did my oil returns to 10.5mm in the block and head, i also added breathers to my sump and used a gated baffel 9lt sump extension and built my own tomie style windage tray to direct returning oil to the pickup area.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • r32-25t
      Can anyone shed some insight on this Turbo?

      By r32-25t · Posted

      Theyre probably just -7 or N1 turbos 
    • kevboost7
      Can anyone shed some insight on this Turbo?

      By kevboost7 · Posted

      The previous owner told me that he had a shop replace the old turbos with these. https://www.enjukuracing.com/products/garrett-rb26dett-gruppe-n-turbo-upgrade.html Anyone know anything about them?  Looks like they are just GT2860R's? Not sure why they are renamed Grup-N...  Does the compressor wheel look like they are in okay condition?    
    • kevboost7
      how do i install this 3 port mac valve for boost control?

      By kevboost7 · Posted

      Just wanted to update everyone. I finally got around to working on the car this year and I did a boost leak test. It seems like i was hooking up the 3 port mac-valve correctly, but there is a massive leak on the rear turbo's wastegate actuator. Where the seam comes together. 
    • Duncan
      Need help about headlight

      By Duncan · Posted

      Just checking; you are buying an aftermarket headlight for your V35, and the new headlight comes with a daylight running light that you want to wire in? You have the option of just not wiring the DRL in, and the new headlight will work like the old. If you want the DRL to work you will have to wire it in on the car as it wasn't delivered with one. Best way is to add a Normally Closed or Changeover relay in the car, and wire: 87a to both DRL power wires 30 to a fused ignition power source 86 to earth 85 tap into the power wire that goes to the low beam headlight Note, you cannot use the much more common Normally Open relay for this, you need the DRL to turn off when the headlight is on and vice versa.
    • Jayson20019
      Need help about headlight

      By Jayson20019 · Posted

      Hi i do buy a aftermarket headlight on ebay. For v35 skyline coupe. I know that its a plug and play and just use the old low beam light and balast from old headlight. But my problem is i dnt have knowlage on car and electrical thing. And the head light getnon ebay is the wire for halo ring light is not connected. I talk to the seller and he said that. What white and black wire for halo robg light is need to connect to RDL. Running day light. Anyone here can tell me how to connect it to Rdl? Which wire is yhe RDL?
×
×
  • Create New...