Jump to content
SAU Community

Recommended Posts

So, I have done some more things :)

Painted the blasted parts in black wrinkle paint. Started off by polishing the RB26 letters, and had some slilcone on them so the paint would not stick.

20150821_171108.jpg

Painted

20150821_201914.jpg

Mounted the AN12 breathers

20150822_093025.jpg

Then, I started to build the downpipe. I started this friday evening and did not get f**king anywere. My mind did not work. So I called it the night, and just watched some tv series instead. So today I started fresh and it all came down to me quick, so after a couple of hours I had buildt the downpipe.

20150822_123809.jpg

20150822_135520.jpg

20150822_135528.jpg

20150822_135543.jpg

20150822_135557.jpg

20150822_135604.jpg

I then wiped some dust of the engine bay and mounted the painted parts to get a look at what the final product might look like.

20150822_135416.jpg

20150822_135424.jpg

20150822_135431.jpg

20150822_135440.jpg

20150822_135513.jpg

Sits pretty low in the bay. Good for lower center of gravety.

20150822_135457.jpg

That is all for now. There will be some weeks before next update. Untill then, take care and stay tuned for the next one. Tanks.

  • Like 4

I got some things done with the car this weekend. Not that everything can be seen on photos. I removed the engine to put on the remaining parts in the oilpan. And sealed it for this time.

As usual, I start off with a coffee break!

20150926_085638.jpg

The air filter I will be using.

20150926_090003.jpg

And the filters for the catch can

20150926_094328.jpg

Got some silicone radiator hoses for R32GTR, but I do not think they will fit.

20150926_094321.jpg

Oil drain for the back of the cylinderhead arrived

20150926_094737.jpg

And some fittings. AN10 and AN12.

20150926_095045.jpg

20150926_095734.jpg

20150926_095957.jpg

Fitted the head drain

20150926_213206.jpg

Welded myself an AN10 for crankcase ventilation where the drain for the rear turbo was before.

20150926_215545.jpg

Got the ATI Superdamper torqued to spec and the waterpump pulley. As well as the complete TBS and intake bolted up with gaskets.

20150926_230517.jpg

Flywheel and clutch mounted.

20150927_185825.jpg

And that leves this for the next time I'm traveling to work on the car.

20150927_190443.jpg

20150927_190823.jpg

  • Like 3
  • 8 months later...

Using the RB25 gearbox, and it is leaking from the front and rear shaft. Car almost catch fire yesterday because of it.

It is now drivable and finished. Been testing yesterday and got some minor things to take care of.

Got some oil leaks that is nr1 priority.

Using the RB25 gearbox, and it is leaking from the front and rear shaft. Car almost catch fire yesterday because of it.

It is now drivable and finished. Been testing yesterday and got some minor things to take care of.

Got some oil leaks that is nr1 priority.

Damn sorry to hear! Hope you get that fixed :)

So is that an RB25 Gearbox from an R33 GTS-T?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...