Jump to content
SAU Community

Recommended Posts

Never too early...

Not sure how I'm gonna feel about supporting Vettel now that he's in a Ferrari...

For me it just makes it easier. Driver I don't like in a team I don't like. Easy. Hoping Kimi finds something for next year. Been sad watching him struggle so much. Will be interesting to see how Lotus go in 2015.

Link to comment
https://www.sau.com.au/forums/topic/451018-formula-1-2015/#findComment-7431359
Share on other sites

He's won his 4 WDC's, its about time he piss away a portion of his prime with that bunch of those traitorous swine

It's just too bad the cancer that is Fernando isn't stuck there with him

But in saying that, looking forward to the dick noses making an exit, 2015 looks promising

Edited by ctjet
Link to comment
https://www.sau.com.au/forums/topic/451018-formula-1-2015/#findComment-7431459
Share on other sites

I just hope renault spend their 63.5 credits or whatever it is (whatever a fking "credit" is) fixing their donkey of a motor for next season. Otherwise it'll be business as usual for Merc.

This motor situation really is BS. I just wish they ditched the electric shit, chucked a couple of turbos on em, and gave them 100kg for the race.

Link to comment
https://www.sau.com.au/forums/topic/451018-formula-1-2015/#findComment-7431464
Share on other sites

I just hope renault spend their 63.5 credits or whatever it is (whatever a fking "credit" is) fixing their donkey of a motor for next season. Otherwise it'll be business as usual for Merc.

This motor situation really is BS. I just wish they ditched the electric shit, chucked a couple of turbos on em, and gave them 100kg for the race, ground effects, smaller wings and big fcuk off tyres.

FYP

Link to comment
https://www.sau.com.au/forums/topic/451018-formula-1-2015/#findComment-7431580
Share on other sites

Homo isn't Senna. I know he tries with the emo thing and the religion but he just isn't. Senna had actual charisma and wasn't a sookie la la and that's just for starters.

If Mc can build a decent chassis (Something which appeared beyond them the last few years) then they may be on for half a good year. The Renault and Ferrari motors aren't suddenly going to be on MB's pace so you'd think Honda would have half a chance to get as close as anyone? First step is to paint the thing orange.

Link to comment
https://www.sau.com.au/forums/topic/451018-formula-1-2015/#findComment-7431793
Share on other sites

Keen to see how Honda's engine goes. Also hoping Renault step things up purely so Ricci can have a good go at the championship next year. I'm happy to say he is a genuine title contender for 2015 (unless Renault/Red Bull screw up)

Hopefully next years Ferrari suits Kimi a bit better, but I think it may also suit Vettel if thats the case. Have to wait and see

Link to comment
https://www.sau.com.au/forums/topic/451018-formula-1-2015/#findComment-7431818
Share on other sites

Honduh engine will be used in this week's Abu Dhabi test...

Mercedes will make it two in a row next year - no doubt at all. Hopefully Lewis goes back to his true self next year with the entourage of rappers, roscoe etc at races, and his previous M.O. of brain fade crashes.

Link to comment
https://www.sau.com.au/forums/topic/451018-formula-1-2015/#findComment-7431895
Share on other sites

Button single-handedly saved 4th place in the constructors for McLaren over Force India. Deserves the drive next year. Out-qualified and thoroughly out raced Magnussen again this weekend. Sure he costs more, but he also brings more in with WCC $$$. If he's not there, I hope McLaren get what they deserve and that Honduh engine turns out to be a real dud.

Link to comment
https://www.sau.com.au/forums/topic/451018-formula-1-2015/#findComment-7431999
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • The average previous owner for these cars were basically S-chassis owners in the US. Teenagers or teenager-adjacent. I often tell people that neglect is easier to fix than something that was actively "repaired" by previous owners.
    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
×
×
  • Create New...