Jump to content
SAU Community

Recommended Posts

10333556_787761031312123_439263898279246

Saturday January 17th 8:00am to 8:00pm

Sydney Motorsport Park

For More info about the Nulon Nationals check out their facebook page

https://www.facebook.com/nulonnationals

Come and join us for the first round of the 2015 Nulon Nationals held at Sydney Motorsport park. A Gymkhana style event like no other, 7 different head to head courses designed to test event the most ballsy drivers, Finished off by 1 huge course at night to finish the event and have a bit of fun with our cars, Spectators are more than welcome and it will be free of charge.

For Nulon Nationals Merchandise click the following link https://nulon.selz.com/

10423925_802528129835413_361673725577642

Please come and support the SAUNSW team as they dominate all!

Our Team Members for this round will be:

Eric in his clean R33 GTR

10906037_816700481751511_754041913660458

Alex in his Stagea. Don't be fooled by the Grocery Getter appearance though, this thing can get around a woolies carpark pretty quick

10885193_790134404368296_842832381339727

Tim in his R34

10298232_784306454951091_770790676294045

Dave in his newly revamped R34

10325392_678842408830830_295853600890345

and Duncan in his mighty leaf!

IMG_9904_zps6636454c.jpg

Link to comment
https://www.sau.com.au/forums/topic/452732-nulon-nationals-2015-round-1-smsp/
Share on other sites

Its going to be a cracking day guys... Racing from 9:00am until 5:00pm, at that time we will introduce 1 big course that takes the whole pan up and give each driver 1 crack at it... "One hit wonder" will sort the men from the boys.

Great attempts at beating the opposition yesterday guys.

Trivia From A Tent:- "They look just like my Mum and Dad; wandering off the road and onto a track where they shouldn't go" > 20 sec later, "Oh sh!t, they won!!!"

Congrats Duncan and Kel for orchestrating that one!

It was great fun running against some strong opposition and looking over at the end to see you slid into the pit a couple of seconds ahead!! The heads up is good competition.

Wasn't too happy on the courses that had cars heading towards each other...

WHAT A DAY!

Thank you to the team for putting on a great show and to everyone who came out and supported the team.

Also a big thank you to Nulon for putting an event like this on, hopefully everyone will get behind Nulon and buy some of their products, so they keep putting this on.

If you want to see behind the scenes of the Nulon factory, have a look at our members only technight we will be holding on 11th February, thread is in the event section. It's not to late to become a member!

Excitement levels went up when our guys came out, here are some of the photos I took yesterday.

16305502835_4e8860d6d7_b.jpg

16118134180_0167b9ec5e_b.jpg

16119351659_e9b2083895_b.jpg

16119654037_1124762d60_b.jpg

16119654247_c2d301b487_b.jpg

16304643532_4ecdaf3219_b.jpg

16304644092_f42c54ae44_b.jpg

16304644152_50349b5a47_b.jpg

15685625793_1cb4c972c8_b.jpg

16303718371_14e8dcb9f5_b.jpg

16304645152_36ffae8f2b_b.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Make sure you drop the GTT base tune back in, and set your injectors again, this will remove anything playing up with it you may have removed. Possibly lean there as it's normally a fast transient going THROUGH atmospheric pressure, and a turbo motor would then quickly go richer as boost builds. The only worry you MIGHT have is ignition timing, as the DE is higher compression than the DET from memory. But again, you're not in boost, so the DE motor will be a lot more forgiving at atmospheric.   Get Murray, Kinkstahs, and Johnny's input on tuning haltechs, those guys have played with tuning enough in the past to be able to help now you're past the trouble shooting stage of the MAP issue
    • @Rusty NutshI mate. Do you have a pinout diagram for the na neo auto ecu? 
    • Yeah thats the plan now. 🤞
    • Have a chat with the tuner, you'd want to drive the car straight there.
    • My mechanic installed all the parts and then got it tuned which i think is around the corner from him
×
×
  • Create New...