Jump to content
SAU Community

Recommended Posts

so his trap speed was less but time was better with the extra shift. Wonder how much softening the suspension helped.

im pretty interested in this convo. I can see both points been a fine line and valid.

Tyres matter here also, if running slicks then the traction lose from doing this change is greatly reduced

This is where everyone is different and every car is different as well and you need to set up your car accordingly

I don't believe by throwing in short diff ratio and doing nothing else would result in a faster ET at a slower MPH, the theory should make that the other way, so what else was done to add traction

I went from 18" every day tyres to 16" drag radials with a bigger diameter and went 0.2 seconds faster at 2MPH slower due to traction increase

  • Like 1

Tyres matter here also, if running slicks then the traction lose from doing this change is greatly reduced

This is where everyone is different and every car is different as well and you need to set up your car accordingly

I don't believe by throwing in short diff ratio and doing nothing else would result in a faster ET at a slower MPH, the theory should make that the other way, so what else was done to add traction

I went from 18" every day tyres to 16" drag radials with a bigger diameter and went 0.2 seconds faster at 2MPH slower due to traction increase

he also changed the the ride height and all the alignment settings to get more tyre on the ground

he also changed the the ride height and all the alignment settings to get more tyre on the ground

Ah huh said the blind man, so faster ET can be put down to better traction from suspension setup but better traction wont lower MPH, that falls fair and squarely on diff ratios

Or possibly change gears less depending on your situation as you can afford to hold a higher gear instead of gearing down..... how long is a piece of string... it just changes the characteristic of the car.... some advantages and some trade offs.....

Ah huh said the blind man, so faster ET can be put down to better traction from suspension setup but better traction wont lower MPH, that falls fair and squarely on diff ratios

Bingo, don't let people know that because it "feels" faster

Or possibly change gears less depending on your situation as you can afford to hold a higher gear instead of gearing down..... how long is a piece of string... it just changes the characteristic of the car.... some advantages and some trade offs.....

So in this case, the 6 speed is slower because of the extra gear change. I race my car a lot and I can tell you the standard 5 speed and 4.11s is only worth replacing if you are having strength problems or want a dog engagement. 4.3's or Getrag conversions don't have a real benefit in performance.

Edited by SimonR32
  • Like 1

Bingo, don't let people know that because it "feels" faster

So in this case, the 6 speed is slower because of the extra gear change. I race my car a lot and I can tell you the standard 5 speed and 4.11s is only worth replacing if you are having strength problems or want a dog engagement. 4.3's or Getrag conversions don't have a real benefit in performance.

Maybe.... I suppose it depends on the application. Obviously Mines thought it's was essential for their setup for Tsukuba, so there must be some advantage there don't you think? Did not bad at willow springs either. I think Mine's did the modification for a reason and I am sure they did enough r&d to support their decision based on the r33 experience.

The 34 was only one sec faster and you can see the 33 labouring on a few of the corner exits. I am sure with shorter gearing the 33 would have been faster. Anyway if you want to see the difference gearing makes, just have the 33 and 34 videos running side by side.

Not saying it's better just different and maybe be an advantage in the correct application.

Hi guys, so took the r34 gt-r to wakefield yesterday for some hot laps. The car goes well with the -5 turbos, but I found the power sweet spot is between 6000rpm-8000rpm. If I shifted a bit early and at 5500rpm it takes longer to get back up to speed. Also on some of the slower corner where some cars are in 3rd gear I find my self shifting down to 2nd otherwise I'll be in 3rd gear at 4500rpm and no power.

First time at wakefield with the gt-r (last time with s2000 was 10 years ago) and needed alot of practice, my best time was 1:14, pretty slow I know, didn't want to post in the laptime thread was too embrassed, LOL. Could have gone a bit quicker with my old turbo I guess as I wouldn't have to shift to 2nd gear that much.

But in conclusion I can say the lag of the -5 turbos didn't bother me too much on track, felt better than on the street cause I'm always above 6000rpm in any gear. Might go better at eastern creek with less slow corners.

  • Like 1
  • 4 weeks later...

Hi guys, currently being offered a Greddy hard pipe suction kit that replaces the twin turbo pipes and afm intake pipes, just want to know if it will make a difference in my setup ie power or response and is it worth getting. Any one with this kit feel a difference at all?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...