Jump to content
SAU Community

Recommended Posts

so his trap speed was less but time was better with the extra shift. Wonder how much softening the suspension helped.

im pretty interested in this convo. I can see both points been a fine line and valid.

Tyres matter here also, if running slicks then the traction lose from doing this change is greatly reduced

This is where everyone is different and every car is different as well and you need to set up your car accordingly

I don't believe by throwing in short diff ratio and doing nothing else would result in a faster ET at a slower MPH, the theory should make that the other way, so what else was done to add traction

I went from 18" every day tyres to 16" drag radials with a bigger diameter and went 0.2 seconds faster at 2MPH slower due to traction increase

  • Like 1

Tyres matter here also, if running slicks then the traction lose from doing this change is greatly reduced

This is where everyone is different and every car is different as well and you need to set up your car accordingly

I don't believe by throwing in short diff ratio and doing nothing else would result in a faster ET at a slower MPH, the theory should make that the other way, so what else was done to add traction

I went from 18" every day tyres to 16" drag radials with a bigger diameter and went 0.2 seconds faster at 2MPH slower due to traction increase

he also changed the the ride height and all the alignment settings to get more tyre on the ground

he also changed the the ride height and all the alignment settings to get more tyre on the ground

Ah huh said the blind man, so faster ET can be put down to better traction from suspension setup but better traction wont lower MPH, that falls fair and squarely on diff ratios

Or possibly change gears less depending on your situation as you can afford to hold a higher gear instead of gearing down..... how long is a piece of string... it just changes the characteristic of the car.... some advantages and some trade offs.....

Ah huh said the blind man, so faster ET can be put down to better traction from suspension setup but better traction wont lower MPH, that falls fair and squarely on diff ratios

Bingo, don't let people know that because it "feels" faster

Or possibly change gears less depending on your situation as you can afford to hold a higher gear instead of gearing down..... how long is a piece of string... it just changes the characteristic of the car.... some advantages and some trade offs.....

So in this case, the 6 speed is slower because of the extra gear change. I race my car a lot and I can tell you the standard 5 speed and 4.11s is only worth replacing if you are having strength problems or want a dog engagement. 4.3's or Getrag conversions don't have a real benefit in performance.

Edited by SimonR32
  • Like 1

Bingo, don't let people know that because it "feels" faster

So in this case, the 6 speed is slower because of the extra gear change. I race my car a lot and I can tell you the standard 5 speed and 4.11s is only worth replacing if you are having strength problems or want a dog engagement. 4.3's or Getrag conversions don't have a real benefit in performance.

Maybe.... I suppose it depends on the application. Obviously Mines thought it's was essential for their setup for Tsukuba, so there must be some advantage there don't you think? Did not bad at willow springs either. I think Mine's did the modification for a reason and I am sure they did enough r&d to support their decision based on the r33 experience.

The 34 was only one sec faster and you can see the 33 labouring on a few of the corner exits. I am sure with shorter gearing the 33 would have been faster. Anyway if you want to see the difference gearing makes, just have the 33 and 34 videos running side by side.

Not saying it's better just different and maybe be an advantage in the correct application.

Hi guys, so took the r34 gt-r to wakefield yesterday for some hot laps. The car goes well with the -5 turbos, but I found the power sweet spot is between 6000rpm-8000rpm. If I shifted a bit early and at 5500rpm it takes longer to get back up to speed. Also on some of the slower corner where some cars are in 3rd gear I find my self shifting down to 2nd otherwise I'll be in 3rd gear at 4500rpm and no power.

First time at wakefield with the gt-r (last time with s2000 was 10 years ago) and needed alot of practice, my best time was 1:14, pretty slow I know, didn't want to post in the laptime thread was too embrassed, LOL. Could have gone a bit quicker with my old turbo I guess as I wouldn't have to shift to 2nd gear that much.

But in conclusion I can say the lag of the -5 turbos didn't bother me too much on track, felt better than on the street cause I'm always above 6000rpm in any gear. Might go better at eastern creek with less slow corners.

  • Like 1
  • 4 weeks later...

Hi guys, currently being offered a Greddy hard pipe suction kit that replaces the twin turbo pipes and afm intake pipes, just want to know if it will make a difference in my setup ie power or response and is it worth getting. Any one with this kit feel a difference at all?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Initially I thought having a pair of Recaro seats would be a big bonus, it turns out these do get a little uncomfortable on long journeys (my fault, not the seat). I had a look through the GSM Performance website at reclining seats and booked an appointment to visit their show room. I got the Recaro Sportster CS for the R34 from here, was very happy with the service received so of course a re-visit was in order. Unfortunately the two Corbeau seats I had chosen aren't on display but they had 4 other options available. Two seats dug into my back, one dug into my legs and the other was perfect. I also found out that Recaro seats use a larger bolt pattern so some adaption was required. Luckily GSM offer some universal adaptors that should solve this problem. I searched the interwebs for price comparisons and Corbeau themselves were the cheapest at £300 cheaper (for the pair). I asked GSM if they could price match, unfortunately they couldn't. I later received an email saying Corbeau would honour them the same discount, but the purchase was already made. I did however order the brackets from GSM, both arrived on the same day. I started with the passenger side seat, knowing this was going to be a little trial and error. There are 3 mounting holes at the front and 2 at the rear on these JURAN Racing seat rails.  With the adaptor brackets mounted, the allen cap bolts started to push into the seat, NOT GOOD!  The rear mounting holes lined up but there were issues at the front. The holes were 1/2 hole out, so the brackets got a tickle with the drill to modify the holes. The supplied bolts weren't going to be long enough and a spacer was needed to stop the adaptor bars from bending. A local fasteners company supplied be with some nylon spacers and longer bolts (M8x30, although these will be replaced with 35mm long shortly) A before and after I pre-drilled the front bracket before making a start on the driver's seat to save some time. And in no time at all that was in the car too. The all black seats have transformed the interior and these are MUCH more comfortable. The only downside with the new Corbeau seats is I sit a little higher, but I'll happily accept that over discomfort. The Youtube video can be found here: https://www.youtube.com/watch?v=wPyttKPktXA
    • All 3 I guess. The car came with the JASI Aero 4 door Type R Full Kit unpainted so this was one thing at the top of my list to complete then I noticed there were body panels parts for this kit so i picked them up along with some black mesh to fill in the front bumper and front side air vents. car is at a paint and body shop atm completing this work. Next I will be addressing the internal bells and whistles, great summer project I can do with the kids.  full interior removal - ,boys car sound deadening - pads and spray ,boys stereo, sound, lighting - Big 3, GTT or bigger alternator ,kids head lining - dye black add star lighting mod ,daughter. That's it for the next 5-6 months. I have some motor maintenance  work i have to plan out. oil filter relocation, gaskets, mounts. beyond that, mind is starting to turn over if i can use a DET intake plenum, block off turbo ports & pipe in a air intake.      
    • roller coaster of a ride. Alarm system was removed & main harness was repaired where possible. still no fix just random successful starts. moved on to the replacing the ignition switch and relay. well all this troubleshooting & repair has been going on, the car is at a paint and body shop being pushed around. Ive been going down there on odd days after work to get it sorted.     
    • 5th November if you want to come out for a spin wakfield
×
×
  • Create New...