Jump to content
SAU Community

Recommended Posts

Hey guys, I have a 1996 R33 skyline GTS-T, recently bought it and thinking of adding some more power, current mods to my knowledge are ;

- splitfire coil packs

- kls power spirit turbo

-fmic and intake (Z32 afm and all the rest)

-high flow cat and full exhaust system

-walbro 500hp fuel pump

-current spark plugs are platinum PFR7B (problem possibly)

-dump pipe

Etc etc etc, basically all the basics

Last tune was in 2013 and was 220kW, I've misplaced the paper though.

So here's my question, what could I do to possibly get it to 250kW, I was thinking cams or ?

Also, at high revs, around 5500-7000 the car starts to spit and misfire, but the plugs were changed in 2013 so I don't know what it could be. I'm aware there's topics on these but I couldn't really gather much from them.

Thanks for your help guys.

Link to comment
https://www.sau.com.au/forums/topic/454621-rb25det-upgrade-and-problem/
Share on other sites

Yeah i vote for checking your sparkplugs/coilpacks and getting a better turbo.. or take it to a well known tuner in your state/location and they will be able to see what your car is doing and most likely be able to help diagnose any/all problems

And you suggested cams, they cost more than a turbo installed ...... Or did you plan on putting them in yourself? You don't seemed clued up enough to do that.......

Edited by Ben C34

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
×
×
  • Create New...