Jump to content
SAU Community

Recommended Posts

After reading that apparently the 370GT 7 speed doesn't need servicing during it's lifetime, I was skeptical. Sounded like a scam to me for Nissan to sell you a new transmission when it dies.

My transmission has felt pretty average since I imported the car so I figured I'd get mine serviced to be on the safe side; being at 63,000kms i figured now was as good a time as any to get it done. Booked into MV Automatics and was driving off 90 mins later.

Definitely recommend MV Autos.

Car is shifting as smooth as butter :thumbsup:

Will give it some stick later tonight to see if there's any improvement in WOT shift times

Link to comment
https://www.sau.com.au/forums/topic/455107-v36-auto-transmission-service/
Share on other sites

After reading that apparently the 370GT 7 speed doesn't need servicing during it's lifetime, I was skeptical. Sounded like a scam to me for Nissan to sell you a new transmission when it dies.

My transmission has felt pretty average since I imported the car so I figured I'd get mine serviced to be on the safe side; being at 63,000kms i figured now was as good a time as any to get it done. Booked into MV Automatics and was driving off 90 mins later.

Definitely recommend MV Autos.

Car is shifting as smooth as butter :thumbsup:

Will give it some stick later tonight to see if there's any improvement in WOT shift times

Very useful information to know Joolz... How much did you pay for this?

I'm considering doing it with mine too :)

Service was $285

I don't actually know what it involved; I just wanted it done... Ignorance is bliss :P

I've read it's a difficult job on the 7 speed so I was more than happy to pay a pro to handle it.

I figured with the price of the fluid, and then labour it seemed fair enough. Far better than me trying to do it :P

If you are curious, I'm sure Michael would be happy to go over what's involved; he's very helpful

I think my initial impressions were a bit of a placebo effect; it's really not that much different to before the service.

However... I took the car for a quick sprint through the hills on the way home from work tonight.

wow

The difference is night and day. It's like a different car!

Under hard acceleration it shifts so quick now! I was feeling disheartened with this car since I imported it with such lazy gear changes and was considering selling it for a manual coupe but I'm so happy now; the shifts are so good :D

It's almost like before I was driving the car around with a slipping transmission or something. Even general in-gear acceleration feels much stronger... it actually feels like a 240kw car which it just didn't before.

:banana:

I think my initial impressions were a bit of a placebo effect; it's really not that much different to before the service.

However... I took the car for a quick sprint through the hills on the way home from work tonight.

wow

The difference is night and day. It's like a different car!

Under hard acceleration it shifts so quick now! I was feeling disheartened with this car since I imported it with such lazy gear changes and was considering selling it for a manual coupe but I'm so happy now; the shifts are so good :D

It's almost like before I was driving the car around with a slipping transmission or something. Even general in-gear acceleration feels much stronger... it actually feels like a 240kw car which it just didn't before.

:banana:

Excellent first hand feedback... I'm really considering doing this when my V36 Skyline arrives...

I think my initial impressions were a bit of a placebo effect; it's really not that much different to before the service.

However... I took the car for a quick sprint through the hills on the way home from work tonight.

wow

The difference is night and day. It's like a different car!

Under hard acceleration it shifts so quick now! I was feeling disheartened with this car since I imported it with such lazy gear changes and was considering selling it for a manual coupe but I'm so happy now; the shifts are so good :D

It's almost like before I was driving the car around with a slipping transmission or something. Even general in-gear acceleration feels much stronger... it actually feels like a 240kw car which it just didn't before.

:banana:

is yours tuned at all? still stock?

They probably put a thinner fluid in, that would make the shifts faster. Did you supply fluids? Most transmission places just use Dextron3. It's what they put in my rebuilt 5 speed.

Any downside to using a thinner fluid Scott?

  • 3 weeks later...

Wanting to take bae (v36) for a service. Now, wanting a transmission service too. Can I get some recommendations on transmission fluids and mechanics in Melbourne?

Also some recommendations for engine oil will be highly appreciated. Hows Mobile 1

0w -40w for the V36?

  • 4 years later...

Hey guys - this is going to sound silly.  My previous mechanic told me it was a sealed unit, but my new one tells me it does require servicing.

It's more than just fluid, there is a filter as well (and gasket I assume).  

Either way - looking forward to my smoother auto... $290 at Kmart Tyre and Auto service.

23 hours ago, Haxorz said:

Hey guys - this is going to sound silly.  My previous mechanic told me it was a sealed unit, but my new one tells me it does require servicing.

It's more than just fluid, there is a filter as well (and gasket I assume).  

Either way - looking forward to my smoother auto... $290 at Kmart Tyre and Auto service.

Hope your new mechanic knows whether its a CVT or standard auto box. Yes "sealed " units (no dipstick) still require servicing unless you can afford to buy a new car every 100,000km

23 hours ago, Haxorz said:

Hey guys - this is going to sound silly.  My previous mechanic told me it was a sealed unit, but my new one tells me it does require servicing.

It's more than just fluid, there is a filter as well (and gasket I assume).  

Either way - looking forward to my smoother auto... $290 at Kmart Tyre and Auto service.

manual states its "optional" To flush the ATF every 50,000 km.

Also says to use "Nissan Matic S" only. Which i just used penrite equivalent.

My shifting was smoother with the paddles after but to be honest i didnt notice much difference over time haha. 

On 6/5/2019 at 2:08 PM, DashyyPC said:

My shifting was smoother with the paddles after but to be honest i didnt notice much difference over time haha.  

A smooth shifting auto means that there's a little more slippage going from one gear to the next. That would concern me a little if it shifted more firmly beforehand.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Wife wanted basket things in the wardrobe in our temporary house. Thought about ripping our the wardrobe and fitting the entire IKEA set, but it's a temporary house and we want to move in a few years. So IKEA advertises this as a 50cm unit, however the actually basket and rails measure 46cm wide. Only issue was depth, IKEA stuff is quite deep, where as the builder special junk is super shallow at less than 40cm. Send it, chopped the rails, then offset the mounting holes, job done, happy wife, less shit scattered all over the bedroom. Did the same to the other side too. Also drove the Skyline shit box today, dropped off oil at Supercheap Auto. I didn't realise they only now take max 2x bottles per visit. I visited 2x Supercheap Autos.  
    • I've seen similar actually in my situation. You never know what tables are attempted to be used when the car thinks it's -99C or +200C. The fail state is not usually that extreme but you know what I mean - it was in my case though! This is where being able to read all the sensors is useful cause you see this stuff really quickly.
    • The above is very important. However as long as you keep timing relatively low, it's plausible to make your own knock ears and plausible to learn to tune with a modern ECU that can do wideband O2 correction like a boost controller. I mean if you only have one viable road to even drive the car on, learning to tinker to this level may be worth doing given you can't do much else with the car...?
    • I find the fact that the rear plate has to be bent inwards at the rear not so bad: but the front is just awful: It's like come on. (these are my very old, now retired/turned in plates) TBH it is a lot of money to fix a minor issue, the fact I said "I'll never really spend the money on doing this" is why people ended up buying them as a gift for a 'car guy' who can be hard to shop for.. for car guy things.
    • I just bent the ends of my premo plates. It even went through Regency like that after the engine conversion and the inspector (a great bloke!) just squinted his eyes and said "I didn't see that". Plates, and how they look, are just something that have zero importance to me.
×
×
  • Create New...