Jump to content
SAU Community

Recommended Posts

The end of an era. Its a little bit sad, like when Nissan stopped making Silvias (Skylines are different, in one form or another, they continued.)

I got this news from Motor Authority. The Final edition will not be based on the HKS built, 473HP concept they revealed last year.

BBS, Bilstein, Eibach and Brembo handle the rolling and stopping. All of those words make me a little excited.

Anyway .. the pics.

gallery_3_5817_50307.jpg

gallery_3_5817_63158.jpg

gallery_3_5817_68822.jpg

gallery_3_5817_39551.jpg

gallery_3_5817_45077.jpg

So freaking nice. Opinions?

Link to comment
https://www.sau.com.au/forums/topic/455733-mitsubishi-evo-final-edition/
Share on other sites

So, Mr suspension and rotors, some coloured stitching and a badge?

Not worth it.

Most who buy a gsr swap the wheels, suspension, pads and rotors for higher performance pieces for heavy track/race days.

Or, just buy the mr.

But, each to their own.

Yes. Evo IIIs were (and are) very special.

I wish I was old enough in the early 1990's to see those on the rally stages.

mitsubishi_lancer_evolution_1995_wallpap

mitsubishi_lancer_evolution_1995_picture

I want her so much, I wish there were more cars like this. The original Evolution GSR is really nice as well.

10.jpg

Edited by FireFox-89

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...