Jump to content
SAU Community

Recommended Posts

Often the pricestarts at the manufacturer. ...not necessarily the shop.
 
 
On a different not.....whos a good window tinter? Need old stuff removed and new stuff put on. Need suggestions. ..kgo



Yeah that one too - oh well I'll do my research on parts in near future before just go ahead and replace em.


Window stuff - Tinter ? Groupon ? Cheap prices [emoji28]

Julian - 0423 202 109. He comes to you to get the tinting done. Have 2 cars at home with his tinting and its been 3 years, no issues whatsoever yet.

His prices are really good too!

Edited by colin.ssc
17 minutes ago, shoey85 said:

What about@z00key &@manne &@r dirty 3 ??

Negative that. Ill be in Caiguna tonight unfortunately. 

Colin ill contact that guy next week to di tinting.  Cheers

  • Like 1



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...